22AV2005D - HFL5214 Remote

22AV2005D - HFL5214 Remote

22AV2005D Picture

selectedImg


Finding out current Multi-RC modes on TV and Remote

On HFL5011 - press OK for 5 seconds
On HFL5214,HFL6214, HFL5114, HFL6114 - press mute for 5 seconds

Changing Remote Multi-RC modes

To change the Multi RC mode on the remote control, you need to:
- press the first button then hold
- then press and hold the second button
- hold both buttons together for about 10 seconds.
- release
your remote multi-rc mode should have changed now.

Here are the different modes and the button combinations
Remote Mode
Buttons Combination
Blue (default)
“Home” and “Blue” (rectangular button at bottom right corner of remote)
Yellow
“Home” and “Yellow”
Red
“Home” and “Red”
Green
“Home” and “Green”
0
“Home” and “0”
1
“Home” and “1”
2
“Home” and “2”
3
“Home” and “3”
4
“Home” and “4”
5
“Home” and “5”
6
“Home” and “6”
7
“Home” and “7”
8
“Home” and “8”
9
“Home” and “9”

Open Up Professional Menu

Mute-Left-Right-Up-Down OK

Open Up CSM Menu

Mute Right Left Down Up OK


    • Related Articles

    • Philips HFL Multi Remote

      Philips Hospitality TV and its remote can be configured to 14 different pair set. (0-9, blue, yellow, green red) A Philips TV can only work with Remote control that matches its remote id. By default both the TV and remote are set to Blue mode To set ...

    • Philips BDL Remote Control Not Working

      Philips Signage Remote control not working: [1] Are you using the correct remote control (RC)? Part number: 398GRABDDNEPHT, see picture below: See important note at the end of this document [2] The green led must blink when you press the OK button on ...

    • 22AV2226A - HFL6214 Remote

      22AV1905A Picture How to change the remote battery 2x AA battery Finding out current Multi-RC modes on TV and Remote On HFL5014, HFL6014, HFL5114, HFL6114, HFL5214, HFL6214 - press mute for 5 seconds Changing Remote Multi-RC modes Below you can find ...

    • xxHFLxx14 How to Update Firmware via CMND

      1. Download firmware from https://support.westan.com.au/portal/en-gb/kb/articles/xxhfl5014-xxhfl6014-xxhfl5114-xxhfl6114-autorun-upg-normal-software-update Make sure the downloaded file's name is 'autorun.upg'. 2. Upload it to CMND: go to 'Files' ...

    • HFL USB Logging

      Step 1. Prepare the USB flash drive Get an empty flash drive and connect it to the PC. In my case the USB flash drive is called “USBFLASH”. In your case it will have a different name. Next step is to format the USB flash drive to FAT32. Select the ...