22AV2226A - HFL6214 Remote

22AV2226A - HFL6214 Remote

22AV1905A Picture


How to change the remote battery

2x AA battery



Finding out current Multi-RC modes on TV and Remote

On HFL5014, HFL6014, HFL5114, HFL6114, HFL5214, HFL6214 - press mute for 5 seconds

Changing Remote Multi-RC modes

Below you can find a table how to match the TV settings and the settings as they can be used in the guest RC (you need to press those buttons for 8 seconds):

Remote Mode
Buttons Combination
Blue (default)
“Home” and “Blue” (rectangular button at bottom right corner of remote)
Yellow
“Home” and “Yellow”
Red
“Home” and “Red”
Green
“Home” and “Green”
0
“Home” and “Clock”
1
“Home” and “Channels”
2
“Home” and “Arrow up”
3
“Home” and “TV”
4
“Home” and “Arrow left”
5
“Home” and “OK”
6
“Home” and “Arrow right”
7
“Home” and “Back”
8
“Home” and “Arrow down”
9
“Home” and “Mute”

Open Up Professional Menu

Mute-Left-Right-Up-Down OK

Open Up CSM Menu

Mute Right Left Down Up OK


    • Related Articles

    • Philips HFL Multi Remote

      Philips Hospitality TV and its remote can be configured to 14 different pair set. (0-9, blue, yellow, green red) A Philips TV can only work with Remote control that matches its remote id. By default both the TV and remote are set to Blue mode To set ...

    • Philips BDL Remote Control Not Working

      Philips Signage Remote control not working: [1] Are you using the correct remote control (RC)? Part number: 398GRABDDNEPHT, see picture below: See important note at the end of this document [2] The green led must blink when you press the OK button on ...

    • 22AV2005D - HFL5214 Remote

      22AV2005D Picture Finding out current Multi-RC modes on TV and Remote On HFL5011 - press OK for 5 seconds On HFL5214,HFL6214, HFL5114, HFL6114 - press mute for 5 seconds Changing Remote Multi-RC modes To change the Multi RC mode on the remote ...

    • HFL Panel Replacement Proceidure

      Applies To Philips Professional Display/TV (BDL/HFL/BFL series) with panel fault symptoms Symptom: Horizontal line, flashing colours, unstable panel drive behaviour or any issue with panel. Typical outcome: Panel replacement required Resolution ...

    • xxHFLxx14 How to Update Firmware via CMND

      1. Download firmware from https://support.westan.com.au/portal/en-gb/kb/articles/xxhfl5014-xxhfl6014-xxhfl5114-xxhfl6114-autorun-upg-normal-software-update Make sure the downloaded file's name is 'autorun.upg'. 2. Upload it to CMND: go to 'Files' ...