24BDL4151T - Setting up BDL with Browser as source

24BDL4151T - Setting up BDL with Browser as source

BDL – Android – 24BDL4151T - Setting up BDL with Media Player

Put the content into the USB in the following directories:
philips/video/ -> video
philips/photo/ -> photo
philips/music/ -> music
philips/pdf/ -> pdf

Get into The Media Player
1. Put the USB stick in the monitor
2. Enter Admin Menu (press Menu THEN Vol- button - NOT TOGETHER)
 

3. Key in password: 1234 (default)
 
 
4. Click Apps
 
5. Click Media Player



Doing basic settings in Media Player
1. Click Settings

 
2. Choose one of the playlist and follow the prompt


3. Hit the back button until the media player is closed

How to set the default input to be the media player, playlist 1.
1. Go back to the admin menu by pressing (MENU) and (Volume↓):
 
2. Select Signage Display
3. Select Boot on source
4. Select Input  
5. Select on Input from the list Select Browser
6. Set playlist = 1 (or whatever number you put above)

DONE..
You can press back until you exit. 

    • Related Articles

    • 10BDL3051T - Setting up BDL with Browser

      A.    Connect to a network   Enter Admin Menu (press Menu and Vol- button together)   Key in password: 1234 (default)   Select “Network”   Select your chosen interface (Wi-Fi or Ethernet) Select “Enable” If Wi-Fi, select your network SSID from ...

    • 24BDL4151T - Setting up BDL with Media Player as source

      BDL – Android – 41BDL3051T - Setting up BDL with Media Player Put the content into the USB in the following directories: philips/video/ -> video philips/photo/ -> photo philips/music/ -> music philips/pdf/ -> pdf Get into The Media Player 1. Put the ...

    • Philips BDL Remote Control Not Working

      Philips Signage Remote control not working: [1] Are you using the correct remote control (RC)? Part number: 398GRABDDNEPHT, see picture below: See important note at the end of this document [2] The green led must blink when you press the OK button on ...

    • Dragon1.0 Setup Guide - Browser Input Latest

      Portrait Mounting This display can be installed in portrait position. 1. If the table stand is attached, remove it first. 2. Rotate the display counter-clockwise by 90°. The “ ” logo should be on the RIGHT side when facing the display. 3. Set the ...

    • xxHFL5009-xxHFL5010 - Setup Guide - Addendum - USB Browser

      Steps:      Contents A.      ENABLE USB Media Browser 2 B.      Playing images/video from USB Source. 2     A.   ENABLE USB   Open up the Professional Menu by pressing remote sequence (3,1,9,7,5,3,mute in 2 seconds) Navigate to the [Professional ...