24BDL4151T Using the touch screen with external PC

• Related Articles

• 43BDL4051T Using the Touchscreen with an External PC

  Use an HDMI cable to connect from the HDMI Output on the PC to the HDMI Input on the screen. Use the USB cable provided with the screen to connect from the USB port on the PC to the USB-B port on the screen (bottom-most port on the side connectivity ...

• Philips BDL Remote Control Not Working

  Philips Signage Remote control not working: [1] Are you using the correct remote control (RC)? Part number: 398GRABDDNEPHT, see picture below: See important note at the end of this document [2] The green led must blink when you press the OK button on ...

• BDL3651T Does the screen support USB passthrough from the screen to the PC connected to it?

  Question: Can a USB device connected to the screen be detected by the PC connected to the screen via the USB-B port Answer: BDL3651T model doesn't pass the USB connected to the screen through to the PC's USB connected to its USB-B port. In other ...

• BDL4252E - ghost touch issue

  When ghost touch (unsolicited touch) are detected on the screen, this can be caused by external device feeding the screen with mouse coordinate somehow. A case was reported by a customer once where a screen exhibited a ghost touch issue. At the end, ...

• BDLxxxxBDL4050D xxBDL4051T 65BDL3051T (Dragon 1.0) - Screen can't be controlled using the remote control

  Symptoms Screen can turn on, but can't be controlled using the remote control Possible cause: 1. Remote control is set to ID mode 2. Remote control is being pointed to the wrong area of the screen. 3. There's an IR cable (3.5mm cable) in the IR In ...