43BDL4051T Using the Touchscreen with an External PC

Use an HDMI cable to connect from the HDMI Output on the PC to the HDMI Input on the screen.

Use the USB cable provided with the screen to connect from the USB port on the PC to the USB-B port on the screen (bottom-most port on the side connectivity panel).

• Related Articles

• Philips BDL Remote Control Not Working

  Philips Signage Remote control not working: [1] Are you using the correct remote control (RC)? Part number: 398GRABDDNEPHT, see picture below: See important note at the end of this document [2] The green led must blink when you press the OK button on ...

• 24BDL4151T Using the touch screen with external PC

• xxBDL4051T 65BDL3051T MAC Touchscreen Driver

  Please refer to this article https://support.westan.com.au/portal/kb/articles/bdlxxxxxt-xxbdlxxxxt-mac-touchscreen-driver

• BDL4052E Setting Redirect Touch/USB to Auto

  Overview BDL4052E running SW FB0109T.Wave version has 3 mode of determining which USB-B port is active 1. Side I/O USB-B-3 (on the side of the screen, facing the Left when viewed from the front) is always active when the screen source is set to any ...

• BDLxxxxxT xxBDLxxxxT MAC Touchscreen Driver

  See installation guide. File is available in the link below UPDD_06_00_729.dmg https://westanonline.sharepoint.com/:f:/s/Support/EiETZ11Im95Js-iYnPmBlHABW_rsVZM4oNha7aG1v7kxMQ?e=rQYeX0