đź“ş AOC-24V2-X Fusion Setup Walkthrough
Applies to: AOC-24V2-X and similar V-Series models
Last Updated: November 2025
Author: Sameen Newaz
Purpose
To guide technicians through the correct process of setting up an AOC-24V2-X display for Fusion Signage operation after delivery or replacement.
This ensures stable playback, proper regional configuration, and network connectivity before handover.
Step-by-Step Setup
The table below outlines the five main phases of the setup process.
1. Power On and Initial Configuration
Step | Action | Detail / Setting |
1.1 | Power On | Turn on the device. |
1.2 | Location | When prompted, select the appropriate location (e.g., Australia). |
1.3 | Wizard | Proceed through the initial setup screens. |
1.4 | Auto Sleep | Set Auto Sleep = Off to prevent unintended screen timeouts. |
2. Source Selection and Fusion Installation
Step | Action | Detail / Setting |
2.1 | Navigate | After setup, you'll see Settings → Sources and Apps. |
2.2 | Source | Select Source → USB. |
2.3 | Install | Open Fusion.apk from the USB drive and install it. |
2.4 | Allow | If prompted with “Unknown sources installation”, select Allow. |
2.5 | Desktop | After installation, press the Home button on the remote and select Desktop. |
3. Advanced Custom Settings (Auto-Boot)
This section ensures the display automatically launches the Fusion app when powered on.
Step | Action | Path | Setting |
3.1 | Custom List | Settings → Advanced → Custom Source List | Untick everything except "Custom." |
3.2 | Enable | Settings → Advanced → Custom → Customer | Tick "Customer." |
3.3 | Boot App | Below the Customer section, choose Boot on Source App | Select Fusion. |
4. Network and Time Settings
Step | Action | Detail / Setting |
4.1 | Wi-Fi | Settings → System → Wi-Fi |
4.2 | Time Zone | Settings → System Time |
4.3 | Verify | Confirm that date and time are displayed accurately. |
5. Final Steps
Step | Action | Verification |
5.1 | Launch | Go to Apps → Launch Fusion. |
5.2 | Test Playback | Verify that the content loads and refreshes properly. |
5.3 | Client Sign-off | Confirm with the client that the display is fully operational. |
Post-Setup Validation Checklist
Status Check | Result |
Display Health | Device displays content correctly with no line or panel faults. |
Fusion Operation | Fusion updates in real time and is successfully displaying content. |
Auto-Boot | Auto-boot to Fusion verified after a full device restart. |
Connectivity | Network and time settings saved and are stable. |
For Official Use Only
Ticket: #24619
Related Articles
AOC-24V2-X Fusion Setup Steps
Turn on the device You'll be ask to select a location, choose suitable location - You'll then be presented with a series of settings - set auto sleep = off Once the initial settings are set, you'll be presented with Settings Sources and Apps Select ...