BDL3511Q USB autoplay

BDL3511Q USB autoplay


USB Autoplay


With the USB Autoplay feature, the screen automatically plays image/video files when the screen is powered on or when the USB drive is re-inserted into the screen.
To use this feature, the photo/video files need to be stored in certain directory location in the USB Drive and named in a certain way.


If you need to play different content at different time of the day or different day of the week, you may want to explore the USB Playlist feature, which is slightly more complex than USB Autoplay feature (https://support.westan.com.au/portal/en-gb/kb/articles/bdl3511q-usb-playlist)

Media File


The USB Autoplay uses the Screen's media player.
It supports both video (MP4) and image file (baseline JPEG).
However, including video into the playlist introduces 1s gap between playing one media to the next.
For best outcome, it's recommended to only play JPEG media files

Baseline JPEG


JPEG file are compressed using progressive and non progressive (baseline/standard) compression.
Progressive compression takes longer to load where the baseline/standard is much faster.

If you're not certain if your JPEG file is a baseline JPEG or progressive, it's easiest to edit the JPEG file using Microsoft Paint, then save it again which should save it as baseline JPEG

Playing Portrait Content


The Internal Media Player only support landscape Video.
If you're mounting the screen in Portrait, you need to rotate it 90 degrees anti-clockwise
To make the portrait image being shown in the right direction, you need to rotate the image 90 degrees clockwise
The easiest way to rotate the image is by editing it in Microsoft Paint, and rotating it 90 degrees clockwise

See the images below to be able to understand the 
If you are mounting the screen in Portrait, you need to rotate the image 90 degree 
JPEG file are compressed using progressive and non progressive (baseline/standard) compression.
Progressive compression takes longer to load where the baseline/standard is much faster.

When the screen is mounted in landscape, the picture will look like this

 

But when the screen is mounted in portrait, the image will be orientated in the correct manner.

 









How to use USB Autoplay function?


1.      Create a folder which should be named as “autoplay” on the USB disk.
2.      Put the sources (PHOTO/Movie) which should be named as 001-030 in a folder named  “autoplay”. (Maximum 30 files)
3.      After boot on or inserting usb on the system, USB Autoplay function starts automatically.

USB folder structure


root






 autoplay






│   001.jpg






│   001.mp4






│   030.mp4






│  031.mp4 (It is out of range)







Screen Configuration

Press Home to bring the Setting Page
Select “Config” > “Boot On Source” Last Input
Select “Option” > “USB Autoplay”


Starting and Stopping the USB Autoplay

To Start USB Autoplay, just turn off and on the screen
To Stop USB Autoplay, you need to press the Stop button on your remote control




Scheduling:

Press Home to bring the Setting Page
Select “Config” > “Boot On Source” Last Input
Select “Option” > “USB Autoplay”

Enter Menu | Set date and Time  | Set “Power Save” Mode 3 or 4



    • Related Articles

    • BDL3117P USB autoplay

      USB Autoplay With the USB Autoplay feature, the screen automatically plays image/video files when the screen is powered on or when the USB drive is re-inserted into the screen. To use this feature, the photo/video files need to be stored in certain ...
    • xxBDL3010Q USB autoplay

      NOTE: USB auto play function is available after TV software ver 1.023; The minimum software version recommended is ver 1.032 USB auto play function with slide show timer feature (to set how long each image is displayed) is available after TV software ...
    • BDL3511Q USB Playlist

      USB Playlist USB Playlist allow the screen to play content from multiple playlist. Different playlist can be played at different time of the day or different day of the week To use this feature, the photo/video files need to be stored in certain ...
    • Philips BDL USB Autoplay - Blue Key

      Description USB AutoPlay allow you to schedule all images in the “philips” (Case sensitive) directory to be displayed at certain times or when the screen is turned on from Low Power Standby mode Applicable Models BDL3230QL, BDL4330QL, BDL4830QL, ...
    • BDLxx30QL USB Autoplay - Blue Key

      Ensure the BDLxx30QL is at least 1.27T3 or beyond To update the SW to the latest (v1.31) follow the procedure below https://support.westan.com.au/portal/en-gb/kb/articles/bdlxx30ql-mtk5580p2-software-update Please refer to the following article ...