BDL3550Q - Static Noise from 3.5mm audio interface
We've received report that some audio device will generate static noise when connected to the screen's 3.5mm audio jack.
Easiest solution to get around this problem is to put a "Ground loop isolator" between the screen and the audio device
Related Articles
BDL4550D - Static Noise from 3.5mm audio interface
We've received report that some audio device will generate static noise when connected to the screen's 3.5mm audio jack. Easiest solution to get around this problem is to put a "Ground loop isolator" between the screen and the audio device
Philips BDL Remote Control Not Working
Philips Signage Remote control not working: [1] Are you using the correct remote control (RC)? Part number: 398GRABDDNEPHT, see picture below: See important note at the end of this document [2] The green led must blink when you press the OK button on ...
xxHFL5x14 xxHFL6x14 Troubleshooting TV Has No Audio
Problem: TV has no audio Possible Cause and Solution 1. TV speaker is set to off or volume is set to 0 Check the following settings: Prof Menu -> TV Settings -> Sound -> Sound Management -> TV Speakers = ON Prof Menu -> TV Settings -> Sound -> ...
xxHFL5011/7011 Troubleshooting TV Has No Audio
Problem: TV has no audio Possible Cause and Solution 1. TV speaker is set to off or volume is set to 0 Check the following settings: Prof Menu -> Sound->Sound Management -> TV Speakers = ON Prof Menu -> Sound->Maximum Volume = set accordingly Prof ...
xxHFL5014/6014/5114/6114 IPTV Audio Choppy
If IPTV Audio sounds choppy.. See example video here https://westanonline.sharepoint.com/:f:/s/Support/EhDbNEPLEeNMvgnYbFzcUJQBm4wjjRB-VFxEZySunJG9MQ?e=9wnp5t Change IPTV Channel setting for the relevant channel(s) in ChannelList.xml from: <Multicast ...