BDL3650Q Setting Up Wifi

BDL3650Q Setting Up Wifi

BDL3650Q can be Wifi Enabled using CRD22 (additional purchase)

For 43BDL3650Q, 50BDL3650Q, 55BDL3650Q, 65BDL3650Q, 75BDL3650Q, 86BDL3650Q, 98BDL3650Q, the CRD22 can be inserted into a slot in the screen. (see picture below)
This slot doesn't exist in the 32BDL3650Q.  To use the CRD22, you need to use a USB Extender and connect the CRD22 via the USB extender.

To Configure Wifi (when the USB Wifi Dongle is inserted into the Screen):
Press Home 1888 to go into Android menu
If password is requested to go into android menu, the default is 1234
Navigate to Network -> Wifi and setup accordingly

For Hidden Wifi,
Select security type first
Then type in Password
They key in the SSID
Otherwise the Password field will be greyed out.

WPA2 Manual Setup
(Office use: E202411211601)





    • Related Articles

    • BDL4152E Setting Up Wifi

      Note BDL4152E comes with CRD22 (USB Wifi dongle) that needs to be inserted into a slot in the screen. (see picture below) To Configure Wifi (when the USB Wifi Dongle is inserted into the Screen): Press Home 1888 or Home->Android Settings to go into ...

    • BDL4650D Setting Up Wifi

      Note BDL4650D (except for 32BDL4650D) comes with CRD22 (USB Wifi dongle) that needs to be inserted into a slot in the screen. (see picture below) To Configure Wifi (when the USB Wifi Dongle is inserted into the Screen): Press Home 1888 to go into ...

    • BDL4052E Setting Up Wifi Connection to Hidden SSID

      Click the Side Bar Click the Cog to open up the setting Select Android Setting Key in the pin (default: 1234) Navigate to "Network & Internet) Setup wifi. Ensure that you set Hidden Network = Yes in Advanced Setting

    • BDL4550D Fusion Signage - Setting Up Wifi

      Overview Sometimes wifi details changes which requires the wifi configuration to be updated. Prerequisite Fusion Signage must already be installed Steps. 1. Turn on screen / ensure screen is turned on 2, Press OK to bring up the Fusion menu 3. Select ...

    • BDL - xxBDL3550Q - Setting up for RS232

      RS232 via DB9 cable Set: Home->Config1->RS232-Routing->RS232 Check the Home->Configuration 2->monitor ID is set to the value that will respond to your SICP command RS232 via Network Set: Home->Config1->RS232-Routing->(LAN->RS232) Set Home->Advanced ...