Prepare OpenVPN Profile files from OnQ (unique per screen)
Call OnQ support to get the OpenVPN Profile files
They need to be told, which shop these screens are for
Ahmad Minhas - 0402 166 498
Rakesh Sonar - 0451 134 961
Jade 0415 549 008
Put the Profile files into the USB Drive prepared in previous step
Prerequisite
BDL3550Q FW need to be FB02.07 or later
The FW version is written on the Box of the screen
Cloning Process (takes about 5 minutes)
Connect Power
Connect Network Cable
Connect the USB to the screen
Click Start
Select "Clone media files from USB storage"
Select "Next", press OK
Select "Import Signage Display Settings from USB"
Select "Next", press OK
Click "Finish"
Wait for 4 minutes for the cloning to complete
Enable Ethernet
Press Home, 1, 8, 8, 8 to go to Android Menu
Select Network and press "OK"
Select Ethernet and press "OK"
Enable Ethernet (if it can't be enabled, make sure that ethernet cable is connected properly and also connected to a working network and try again)
Configuring OpenVPN
Press Home, 1, 8, 8, 8 to go to Android Menu
Select Apps and press "OK"
Select "OpenVPN for Android"
Navigate to the Add sign by pressing "up", "up", "right", "ok"
Click the Minimize below
Click Import
Navigate to "/mnt/usb/... " and click "OK"
Choose an unused .ovpn profile for the screen.
Label the screen's box with a white label with the .ovpn profile filename (this will help them to understand which screen goes where)
Navigate to the associated .ovpn setting file for the screen
Then navigate down to the "Select" button
Click "Ok" on the remote
Navigate to the "tick" sign on the top right corner
Click "OK" on the remote
You'll be brought back to this screen,
Select the correct vpn profile under the profile tab and press the "OK" button to begin connection
OpenVPN should try to establish the connection. Once done, press "back" to go to the main OpenVPN Menu
Press Back to go to the main OpenVPN Menu
Navigate to the "Edit" logo on the right
Click "Ok" button on the remote
Navigate to "Allowed Apps" tab
Enable "VPN is used for all apps but exclude selected"
Enable "Allow apps to bypass the VPN"
Enable "Host"
Enable "OnQ CMS"
Press "back" button on the remote to go back to the main OpenVPN menu
1. Navigate to "Settings" tab
2. Select "Default VPN"
Choose the VPN connection profile you've just imported
Click the "OK" button on the remote to confirm
3. Navigate to "Keep VPN connected"
"Tick" the checkbox to enable it
When a pop-up window open, navigate to "OK" and click "Ok" on your remote button to confirm
Press "back" until you exit OpenVPN
Call OnQ support for them to Teamviewer into the screen to configure the app.
They need to be told, which shop these screens are for
Ahmad Minhas - 0402 166 498
Rakesh Sonar - 0451 134 961
Screen will show this page
Tick - Always allow from this computer
Click "Ok"
Once Content appear on the screen, Configure:
Time Zone
Home->Advanced option->Date and Time
Select the appropriate time zone and hit OK to save it
Schedule (usually doesn't need to be changed)
Go back to Home->Advanced Option->Schedule
Ensure the Schedule start and end time is correct
Ensure Input is set to the correct source, Custom for OnQ App
Days of the week are all ticked
Every week is ticked
And most importantly, schedule is enabled
Click Save
Orientation
Navigate to Home->Configuration 2->System rotation
Set the appropriate Orientation