BDL4550D - Picture is Upside Down when in Portrait Orientation

Possible Issue:

If the model is 32BDL4550D and 98BDL4550D and the SW is old, you need to update the SW to at least FB02.03 or later

To check, press Info 77

To update to the latest version, follow the instruction in the following article

https://support.westan.com.au/portal/en-gb/kb/articles/xxbdl4550d-firmware-update-procedure

Portrait Mounting Physical Orientation

This display can be installed in portrait position.

1. If the table stand is attached, remove it first.

2a. 43BDL4550D, 50BDL4550D, 55BDL4550D, 65BDL4550D, 75BDL4550D, 86BDL4550D

      Rotate the display counter-clockwise by 90°. The “ ” logo should be on the RIGHT side when facing the display.

2b. 32BDL4550D or 98BDL4550D

      Rotate the display clockwise by 90°. The “ ” logo should be on the LEFT side when facing the display.

3. Set the following setting so that the Menu is oriented correctly (Home->Configuration 2->OSD Rotation->Portrait)

43BDL4550D, 50BDL4550D 55BDL4550D 65BDL4550D 75BDL4550D, 86BDL4550D	32BDL4550D 98BDL4550D

• Related Articles

• BDL3550Q Portrait Mounting Orientation

  Physical Mounting Orientation for Portrait The screen must be physically mounted as follow

• BDL3650Q Portrait Mounting Orientation

  Physical Mounting Orientation for Portrait The screen must be physically mounted as follow

• BDL4650D Portrait Mounting Orientation

  Physical Mounting Orientation for Portrait The screen must be physically mounted as follow

• BDL4550D Portrait Mounting Orientation

  Physical Mounting Orientation for Portrait The screen must be physically mounted as follow 43BDL4550D, 50BDL4550D 55BDL4550D 65BDL4550D 75BDL4550D, 86BDL4550D 32BDL4550D 98BDL4550D

• Philips BDL Remote Control Not Working

  Philips Signage Remote control not working: [1] Are you using the correct remote control (RC)? Part number: 398GRABDDNEPHT, see picture below: See important note at the end of this document [2] The green led must blink when you press the OK button on ...