BDL4550D - Scheduling Setup

BDL4550D - Scheduling Setup


Configure Time Zone, Schedule


Time Zone

Check the installation/ship to address and work out the timezone
Home->Advanced option->Date and Time


Select the appropriate time zone and hit OK to save it


Schedule

Go back to Home->Advanced Option->Schedule


Ensure the Schedule start and end time is correct
Ensure Input is set to the correct source, Custom
Days of the week are all ticked
Every week is ticked
And most importantly, schedule is enabled
Click Save




    • Related Articles

    • Phoenix 1.0 - Scheduling Setup

      Ensure  Home -> General settings -> Eco mode = Normal  Home -> General settings -> Advanced power management = Off Set the Date & Time Home -> General Settings -> Clock  Set the current time accordingly Set Schedule Home -> General Settings -> ...

    • Philips BDL Remote Control Not Working

      Philips Signage Remote control not working: [1] Are you using the correct remote control (RC)? Part number: 398GRABDDNEPHT, see picture below: See important note at the end of this document [2] The green led must blink when you press the OK button on ...

    • xxBDL505xP (Dragon 1.5) scheduling setup

      Ensure  Home -> Advanced option -> Power save = Mode 4 Set the Date & Time Home->Advanced option->Date and time  Set Auto sync temporarily to No (so you can change the date and time.)  Set Year, Month, Day, Hour, Minute and Daylight Saving time ...

    • BDL Model Size Comparisons

      Do refer to the list that is under the [Attachment] column and if there are changes as the years go by, do update! Thanks.

    • xxBDL4050D, xxBDL4051T, 65BDL3051T (Dragon 1.0) Scheduling Setup

      Ensure  Home -> Advanced option -> Power save = Mode 4 Set the Date & Time Home->Advanced option->Date and time  Set Auto sync temporarily to No (so you can change the date and time.)  Set Year, Month, Day, Hour, Minute and Daylight Saving time ...