BDL4550D - Static Noise from 3.5mm audio interface
We've received report that some audio device will generate static noise when connected to the screen's 3.5mm audio jack.
Easiest solution to get around this problem is to put a "Ground loop isolator" between the screen and the audio device
Related Articles
BDL3550Q - Static Noise from 3.5mm audio interface
We've received report that some audio device will generate static noise when connected to the screen's 3.5mm audio jack. Easiest solution to get around this problem is to put a "Ground loop isolator" between the screen and the audio device
Philips BDL Remote Control Not Working
Philips Signage Remote control not working: [1] Are you using the correct remote control (RC)? Part number: 398GRABDDNEPHT, see picture below: See important note at the end of this document [2] The green led must blink when you press the OK button on ...
BDL - Android Base Screen - Logging
The log file from an android based BDL models can be downloaded via the remote control or via ADB. 1. Via the remote control: Insert an USB stick in the monitor, press “home 1666 back” in a sequence on the remote control > the log file will be copied ...
BDL4550D built in Android video doesn't get relayed via DVI Out interface
Unlike the xxBDL4050D where the built in Android video was relayed to the DVI-D Out interface, the xxBDL4550D doesn't do this because of design reason. So.. there's no configuration that can be done to enable this.
BDL - Dragon 1.0 (xxBDL4050D) - Android Module Software Update
PHILIPS D Line Android Module Software Update Check if the screen is already running the latest Software version (FB11.04). Press in sequence "info, 7, 7", check if the Android FW Version is FB11.04 Download the latest Android firmware: ...