BDL4988XL BDL5588XL BDL5588XH 65BDL3010T (Phoenix 1.0) Software update

BDL4988XL BDL5588XL BDL5588XH 65BDL3010T (Phoenix 1.0) Software update

For models : BDL4988XL BDL5588XL BDL5588XH 65BDL3010T
Download this firmware file:
How to upgrade the firmware:
1. Switch on the unit;
2. The monitor should startup (led is green);
3. Unplug the power connector or switch off the main AC switch;
4. Repower the monitor by the power connector or the AC switch;
5. Wait until you see any picture or OSD message (even “no signal” is fine);
6. Copy the file "upgrade_loader.pkg" to the main folder of an USB stick;
a. Do not rename this file.
7. Plug the USB stick in the USB connector of the monitor;
8. Unplug the power connector or switch off the main AC switch;
9. Repower the monitor by the power connector or the AC switch;
10. Display will show "Software upgrade in progress” ;
a. Firmware upgrade takes approximately 7 minutes.
11. After finishing the upgrade process, the monitor will reboot by itself;
12. Remove the USB stick;
13. Perform a factory reset from the factory menu:
a. Press on the remote control : HOME, 1, 9, 9, 9,BACK;
b. Select “Factory Reset” and press OK ;
c. After +/- 10 secs a green message will appear on the screen “Set to virgin(FINAL)
mode”;
14. Unplug the power connector or switch off the main AC switch;
15. Repower the monitor by the power connector or the AC switch;
16. Done!
NOTE: if "Software upgrade in progress…" not appear on the screen try with different USB stick
(FAT32 formatted).
How to read the firmware version:
Press “HOME, 1, 9, 9, 9, BACK”, a window will popup, select “F/W version” and press ok.


    • Related Articles

    • BDL - Dragon 1.5 (xxBDL5055P xxBDL5057P) - Android Module Software Update

      PHILIPS P Line Android Module Software Update Download the latest android firmware: https://westanonline.sharepoint.com/:f:/s/Support/En4_bUolLahbj4BRjTvfbVwB5BGH-xKnlqVwAUyb0ZoGlg?e=3NmvCP In the root directory of a USB disk place ...
    • BDL3050S - Firmware Update Procedure

      Press the following remote control button sequence, INFO, 7, 7 , to check if the Android FW Version is FB02.04. If not, download the latest Android firmware (upgrade.zip) to a PC from https://bit.ly/3UXgJXI (that's three, U for Unicorn, X for X ray, ...
    • BDL3452T - Firmware Update Procedure

      Press the following remote control button sequence, INFO, 7, 7 , to check if the Android FW Version is FB03.10. If not, download the latest Android firmware (upgrade.zip) to a PC from ...
    • BDL4550D - Firmware Update Procedure

      Press the following remote control button sequence, INFO, 7, 7 , to check if the Android FW Version is FB02.20. If not, download the latest Android firmware (upgrade.zip) to a PC from ...
    • xxBDL4550D - Firmware Update via TeamViewer

      See attachment Upgrade firmware via teamviewer.pdf