BDL6005X BDL8005X BDL8007X BDL2105X BDL3207X BDL4107X How to get rid of the white background after the screen is turned on for the very first time

BDL6005X BDL8005X BDL8007X BDL2105X BDL3207X BDL4107X How to get rid of the white background after the screen is turned on for the very first time

Power off the screen from the main power / using the rocker switch
Power on the screen using the rocker switch while pressing the power button for at least 5 seconds.

    • Related Articles

    • xxHFL2889 Reset TV back to First Time Installation

      Overview The Reset TV option is available only in the Normal TV Menu when Hotel TV Mode is disabled. To be able to get the TV SW Version we need to: - Turn Hotel Mode off - Invoke First Time Installation Getting the SW Version Using Normal TV Remote ...

    • Philips BDL Remote Control Not Working

      Philips Signage Remote control not working: [1] Are you using the correct remote control (RC)? Part number: 398GRABDDNEPHT, see picture below: See important note at the end of this document [2] The green led must blink when you press the OK button on ...

    • xxBDL4050D xxBDL4051T 65BDL3051T (Dragon 1.0) TeamViewer / App can't get connected

      Possible Issue: 1. Network Connection Issue       Ethernet             - check your ethernet cable is plugged in properly and connected to the correct switch/router at the back end             - check if the DHCP server is working properly by testing ...

    • BDL6005X BDL8005X BDL8007X BDL2105X BDL3205X BDL3207X BDL4107X How to connect to older Philips X Series screens

      Video signal The older model - HDMI, DVI are being looped through via DVI Out - Display Port are being looped through via Display Port Out The newer model - HDMI, DVI, Display Port are being passed through via Display Port Connecting the two models ...

    • BDL - Android Base Screen - Logging

      The log file from an android based BDL models can be downloaded via the remote control or via ADB. 1. Via the remote control: Insert an USB stick in the monitor, press “home 1666 back” in a sequence on the remote control > the log file will be copied ...