CRD61 - How to Pair HDMI Dongle

CRD61 - How to Pair HDMI Dongle



Warning
Works best in 2.4Ghz Wifi network
Connect the monitor to a wireless password protected WiFi network.
If the monitor doesn’t have WiFi, connect it to a WiFi router via a LAN cable, connect your PC to the same router via WiFi.
Connect the HDMI dongle to an USB input of the monitor


The LED start flashing blue on the dongle, after a few seconds a message appear on the monitor, see screenshot below.
Enter the SSID and password of the connected WiFi router.


Once you did enter the SSID and the WiFi password the monitor will start pairing.
A “paring” message will appear on the monitor, once paired a confirmation will follow on the screen, see screenshot below.
The led on the HDMI dongle is now RED.



Connect the HDMI dongle (HDMI & USB) to your PC.
The LED flash blue, push the button on the HDMI dongle, the LED stay blue and the content is now shared to the monitor.
Push the button again to stop sharing the content to the monitor.






Notes
Interact User Guide (20250114 version) attached for reference


Office use only
#one_link 20250114