Customer B - BDL4050D How to Set Screen's Schedule

Customer B - BDL4050D How to Set Screen's Schedule



Home ⇾ Advanced Option ⇾ Schedule ⇾ Action

 

Setting up the Schedule

You can configure up to seven schedules.

To enable the configured schedule, you must TICK the box, on the left of the Schedule number

For Fusion Signage, Input must be set to Custom.

"Every Week" must be ticked, otherwise the schedule will only run once (1 week)


Home ⇾ Advanced Option ⇾ Date & Time

Ensure Auto Sync is set to set to Yes

Press Home,1,8,8,8 to go to android settings
Select Settings->Date&Time - Set the correct timezone



Se the Advance option ->Power Mode to mode 1.. So when the screen is scheduled to turn off, Fusion will appear offline on the portal.

    • Related Articles

    • Customer B - BDL4550D How to Set Screen's Schedule

      Home ⇾ Advanced Option ⇾ Date & Time Ensure Auto Sync is set to Enabled (ticked) Time zone is set correctly (to your timezone) Home ⇾ Advanced Option ⇾ Schedule ⇾ Action Setting up the Schedule You can configure up to seven schedules. To enable the ...

    • BDL - Android Base Screen - Logging

      The log file from an android based BDL models can be downloaded via the remote control or via ADB. 1. Via the remote control: Insert an USB stick in the monitor, press “home 1666 back” in a sequence on the remote control > the log file will be copied ...

    • Philips BDL Remote Control Not Working

      Philips Signage Remote control not working: [1] Are you using the correct remote control (RC)? Part number: 398GRABDDNEPHT, see picture below: See important note at the end of this document [2] The green led must blink when you press the OK button on ...

    • Customer B - BDL4550D Menu Board Common Troubleshooting Steps

      Wifi issues Step 1 - Turn the screen of at the powerpoint leave it off for 10-15 minutes and then turn it back on again before trying to connect it back to the wi-fi. Step 2 – If rebooting the screens doesn’t work try turning of the router/modem for ...

    • Customer B - BDL4050D Fusion Signage Menu Board Common Issues

      Content Are Not Updating Ensure screen is connected to the Local Wifi - click here If the screen status is offline although it is connected to local wifi, there's a possibility that the customer's LAN doesn't connect to the internet. Please try ...