Dragon 1.0 OSD Factory reset

Dragon 1.0 OSD Factory reset


  1. Press home button on the remote
  2. Scroll down and select configuration 2
  3. Hit the arrow button to go to the right-hand side of the menu and scroll down until you see Configuration 2 reset as per picture:
  4. Select Configuration2 reset by pressing OK and you will see the following screen:


    • Related Articles

    • BDL3511Q Factory Reset Screen

      This procedure will wipe all configurations on the screen. Enter the factory menu by pressing ‘home 1999 back” in a sequence on the remote control. A blue screen will appear Select “Factory Reset”. Press "OK" to confirm

    • BDL4052E Factory Reset

      This procedure will reset your screen back to the welcome screen and wipe all the apps and settings that has been installed Press Home->Android Settings (default pin: 1234) Signage Display -> System Tools -> Reset

    • xxHFL7011 xxHFL7111 NVM Reset Procedure

      Introduction NVM (Non Volatile Memory) Reset Procedure overwrite the NVM memory area with a model specific NVM image that is usually loaded during the TV's assembly process. The NVM image used is dictated by the LCD component (the front part of the ...

    • xxHFL5011 NVM Reset Procedure

      Introduction NVM (Non Volatile Memory) Reset Procedure overwrite the NVM memory area with a model specific NVM image that is usually loaded during the TV's assembly process. The NVM image used is dictated by the LCD component (the front part of the ...

    • BDL4550D Reset

      Android Reset Resetting the Android will erase all the installed app and settings Go into android menu (Home 1888) Navigate to Settings->Signage Display->System Tools->Factory reset Scaler Setting Reset Home->Configuration 1->Factory Reset