Dragon1.0 Setup Guide - Browser Input Latest

Dragon1.0 Setup Guide - Browser Input Latest

Portrait Mounting

This display can be installed in portrait position.
1. If the table stand is attached, remove it first.
2. Rotate the display counter-clockwise by 90°. The “ ” logo should be on the RIGHT side when facing the display.
3. Set the following setting so that the Menu is oriented correctly (Home->Configuration 2->OSD Rotation->Portrait)



D-Line Screen Settings

Press the Home Button to bring the Settings Menu
Configuration 1-> Switch On State = Forced On
Advanced Configuration -> Power Save = Mode 4

Creating Browser Playlist

Using the remote, Press Source->Browser

Click Settings


Choose one of the playlist and follow the prompt


3. Hit the back button until the media player is closed



Setting the Screen to Boot to the Media Player when turned on

Home->Configuration 1->Boot on source->Action

 Set Input = Browser

Playlist = 1 (or whichever playlist you prefer)



    • Related Articles

    • Dragon 1.0 - Setup Guide - Video Wall

      Note: This guide shows you the steps required to set-up a video wall Video wall daisy chaining (passing video signal from one screen to another) must only be done through DVI loop through and/or Display Port loop through. Using the 1st screen's HDMI ...

    • 10BDL3051T - Setting up BDL with Browser

      A.    Connect to a network   Enter Admin Menu (press Menu and Vol- button together)   Key in password: 1234 (default)   Select “Network”   Select your chosen interface (Wi-Fi or Ethernet) Select “Enable” If Wi-Fi, select your network SSID from ...

    • Phoenix 1.0 Setup Guide - Video Wall - Latest

      Note: This guide shows you the steps required to set-up a video wall Video wall daisy chaining (passing video signal from one screen to another) must only be done through DVI loop through and/or Display Port loop through. Using the 1st screen's HDMI ...

    • Phoenix 1.1 Setup Guide - Video Wall - Latest

      Note: This guide shows you the steps required to set-up a video wall Video wall daisy chaining (passing video signal from one screen to another) must only be done through DVI loop through and/or Display Port loop through. Using the 1st screen's HDMI ...

    • xxHFL3011 - Setup Guide – How to use USB Browser

      Important remote sequence: Professional Menu 319753mute CSM Menu 123654 A. ENABLE USB Media Browser Open up the Professional Menu by pressing remote sequence (3,1,9,7,5,3,mute in 2 seconds) Navigate to the [Features Settings] -> [USB Media Browser] ...