FSMP - Reimage SW using the Factory Tool SW on a PC and a USB-A to USB-A
SOP and latest .img file (20220228) can be found in this link
Note.. please connect the USB cable to the USB-2 port (see picture below)
Related Articles
FSMPv2 - Reimage SW using the Factory Tool SW on a PC and a USB-A to USB-A
SOP and latest .img file (20220913) can be found in this link https://westanonline.sharepoint.com/:f:/s/Support/Em3kLtDUnShHptNRQSxkrzQBVrR-uStEsVSK_Qo3xYWLbQ?e=MWVG1vFSMP - Reset the device
Resetting the FSMP will erase wifi configuration and Fusion signage identity. You need to reconfigure the wifi and then you'll get a new Fusion signage identity. Because of this, you'll also need to: - delete the old Fusion signage identity from your ...FSMP - Installation Guide
Make sure: - You are using the FSMP Remote - the remote has a working battery - point the remote to the FSMP device (NOT THE SCREEN) Connecting To the Internet You can connect FSMP via Wifi or Ethernet. If you are connecting the FSMP through the ...FSMP - Connecting to new wifi
Make sure: - You are using the FSMP Remote - the remote has a working battery - point the remote to the FSMP device (NOT THE SCREEN) Press the OK button to bring up the Fusion Signage menu Select Settings, then click OK Select Wifi Settings, then ...FSMPv2 - Firmware and Temviewer Host Update
Preparation FORMAT a USB Drive with FAT32 Download The Desired Firmware Version Note Link v20241113 Default FW with Players n/a v20250519 For Novastar connected screens https://bit.ly/49Z6AS5 v20260112 For 4K Resolution https://bit.ly/4pD9JuP Note: ...