FSMPv2 - Updating the SW

Update Procedure SOP

FORMAT a USB Drive with FAT32

Download update.zip file v20231026 from here https://westanonline.sharepoint.com/:f:/s/Support/EoBRdr4bsoZBuaWCsq83NdUB73ELj0l5HN86YWnFOV1HYg?e=23KbAk

Copy the update.zip file to the root directory of a USB Drive

Insert USB into FSMPv2

The Device will recognize the update.zip in the USB, and prompt if you want to install it.

(to highlight “Install” SW update, I had to press down button on the FSMPv2 remote 3x when the prompt appear)

Press DOWN, DOWN, DOWN on the remote until the "Install" button is highlighted.

Then press OK to begin install

The FSMPv2 will reboot, remove the USB Drive when SW update is complete 

For the following MAC Address, please follow the following procedure:

https://support.westan.com.au/portal/en-gb/kb/articles/fsmpv2-reimage-sw-using-the-factory-tool-sw-on-a-pc-and-a-usb-a-to-usb-a

D05F64D2800D

D05F64D27E2A

D05F64D27E93

D05F64D27FC6

D05F64D27E22

D05F64D27E7C

D05F64D27E86

D05F64D27E95

D05F64D27EA4

D05F64D27E29

D05F64D27FC8

D05F64D27E2C

D05F64D27E7F

D05F64D27FD0

D05F64D27D1C

D05F64D27EA5

D05F64D27FB2

D05F64D27FD7

D05F64D27FD6

D05F64D27E83

D05F64D27E80

D05F64D27E7B

D05F64D27EAA

D05F64D27E8C

D05F64D27E96

D05F64D27E70

D05F64D27E1C

D05F64D27E89

D05F64D27D1D

D05F64D27E92

D05F64D27FD5

D05F64D27FC2

D05F64D27E2F

D05F64D27FCD

D05F64D27E91

D05F64D27E2E

D05F64D27E9C

D05F64D27E88

D05F64D27FC0

D05F64D27E31

D05F64D27E97

D05F64D27E99

D05F64D27FBA

D05F64D27E9A

D05F64D27FC3

D05F64D27E32

D05F64D27E30

D05F64D27E28

D05F64D27FCA

office use only: #9361

• Related Articles

• FSMPv2 - Reimage SW using the Factory Tool SW on a PC and a USB-A to USB-A

  SOP and latest .img file (20220913) can be found in this link https://westanonline.sharepoint.com/:f:/s/Support/Em3kLtDUnShHptNRQSxkrzQBVrR-uStEsVSK_Qo3xYWLbQ?e=MWVG1v

• FSMPv2 - Fusion Signage Software doesn't update automatically

  If Fusion Signage Software in FSMPv2 doesn't get automatically, this is most likely because the FSMPv2 Hardware is running an older SW version. Please follow the article in the link below to update the FSMPv2 Hardware's SW version ...

• FSMPv2 - Video Doesn't Appear on Aurora LED Screen

  This is a known issue which is fixed with FSMPv2 20220622 or later Latest SW and update procedure can be found in this article https://support.westan.com.au/portal/en-gb/kb/articles/fsmpv2-updating-the-sw Office Use Only: #8089

• FSMPv2 - When device is set to portrait in the device rotation, it always revert back to landscape after reboot (when using a non-fusion app)

  This is a known issue which is fixed with FSMPv2 20221202 or later Latest SW and update procedure can be found in this article https://support.westan.com.au/portal/en-gb/kb/articles/fsmpv2-updating-the-sw Office Use Only: #9928

• FSMPv2 - Video Appears pinkish when connected to a non LED screen

  This is a known issue which is fixed with FSMPv2 20221111 or later Latest SW and update procedure can be found in this article https://support.westan.com.au/portal/en-gb/kb/articles/fsmpv2-updating-the-sw Office Use Only: #8639