HFL4x14 RepairGuide MainBoard Replacement Latest

Useful info:

1. You need a Philips remote control with numeric buttons

2.       See position of main board in service manual in the link below [Download]

3.         Important remote sequence:

Factory Menu	Home 1999 back
Professional Menu	319753mute
SAM Menu	062596OK(or info) Professional Menu must be set to off. Professional Menu->Professional Settings->Professional Mode=Off
CSM Menu	123654

        

Steps:

1.       Install new Main board

2.       Turn screen on

3.     If the TV shows Factory Mode message on the top left

       

      Guest remote with Digit: press 0,1,9,9,9,back to change the mode.

      Light Green Service Remote:

            - Press RC6 Guest (to change the remote mode to RC6 Guest)

            - Press 0,1,9,9,9, back

       you'll get the following message

      

4.   Perform NVM Reset the TV to the correct model to make it show the correct model and also behave correctly

Follow this article

      https://support.westan.com.au/portal/en-gb/kb/articles/xxhfl4014-nvm-reset-procedure

5.       Changing  Model and S/N

       Using Guest remote with Digit

      Turn professional mode off

          Press 319753mute->Advanced ->Professional Mode=Off

                 Choose SKIP INSTALLATION (OTHERWISE THE TV WILL RESET ITSELF)

          Press the BACK button repeatedly to exit from the Professional menu

      Go into the SAM Menu

       Press the TV button to change the Source to TV

       Press this sequence to go into SAM Menu: 0,6,2,5,9,6,OK (if this doesn't work try 0,6,2,5,9,6,i+)

       

        Press Continue to continue

 Go to NVM Editor  (If all the options are greyed out, please exit SAM Menu and go back in into SAM Menu again)

 Go to Service Data

 - Type Number is the Model of the TV - this should've been set correctly by the NVM Reset procedure (eg. 28HFL4014T/12, 32HFL4014, etc) (Verify with the label behind the TV)

 - Production Number is the Serial Number of the TV - please set this to the correct value (i.e. FZ.....) (See the label behind the TV)

 Press back many times to quit the SAM Menu

      Turn professional mode on:

       Press 319753mute->Advanced ->Professional Mode=On

       Press back many times to exit the Professional Menu

      Using   Light Green Service Remote

      Turn professional mode off

       Press RC6 Setup

       Press the double Cog symbol (between the House[filled] button and House[hollow] buttons)

            

       Navigate to  Advanced ->Professional Mode=Off

                 Choose SKIP INSTALLATION (OTHERWISE THE TV WILL RESET ITSELF)

       Press the BACK button repeatedly to exit from the Professional menu

 

      Go into the SAM Menu

       Press RC6 Guest

       Press the TV button to change the Source to TV

      

       Press 0,6,2,5,9,6,OK (if this doesn't work try 0,6,2,5,9,6,INFO/CSM)

       

        Press Continue to continue

 Go to NVM Editor  (If all the options are greyed out, please exit SAM Menu and go back in into SAM Menu again)

 Go to Service Data

 - Type Number is the Model of the TV - this should've been set correctly by the NVM Reset procedure (eg. 28HFL4014T/12, 32HFL4014, etc) (Verify with the label behind the TV)

 - Production Number is the Serial Number of the TV - please set this to the correct value (i.e. FZ.....) (See the label behind the TV)

        Press back many times to quit the SAM Menu

      Turn the Professional Menu back on

       Press RC6 Setup

       Press the double Cog symbol (between the House[filled] button and House[hollow] buttons)

           

 Navigate to ->Advanced ->Professional Mode=On

       Press back many time to exit Professional Menu

            

• Related Articles

• Mainboard Repair Guide for BDL3230QL, BDL4330QL, BDL4830QL, BDL5530QL, BDL4335QL, BDL4835QL, BDL5535QL

  Document Title MTK5580P2 RepairGuide MainBoard Replacement Latest Purpose Help guide technician in replacing main board Last Updated 21/8/18 Location Knowledge Base\Philips BDL\ MTK5580P2\Repair Guide\ Applicable Models ...

• Dragon1.5 RepairGuide MainBoard Replacement Latest

  1.       Download the correct Scalar SW from https://westanonline.sharepoint.com/:f:/s/Support/Eu5CmksHWlVcm38ESftrseoBd2vC03BBYwOVbZI7fw19qw?e=oEkttn Pay attention at the bin file, the file name must match the model number of the monitor you need to ...

• xxHFL5011 RepairGuide MainBoard Replacement Latest

  Parts: Model Main Board Note 32HFL5011T CBPFF8FBA5S Need to check based on SN 32HFL5011T BPRSH8FBA1S Need to check based on SN 40HFL5011T CBPFF8FBA5S Need to check based on SN 43HFL5011T BPRSG8FBX100SX Need to check based on SN 43HFL5011T ...

• QL3 RepairGuide MainBoard Replacement Latest

  Useful facts: 1.       See position of power board in service manual in the link below https://westanonline.sharepoint.com/:f:/s/Support/Eg2P8vbozPdSqLN_Eku8e8oB6SVhS29Vo6fV7UsH5eqm9g?e=1RrAvT 2.       Important remote sequence: Factory Menu Home ...

• xxHFL2889 RepairGuide MainBoard Replacement

  If you have to replace a board, and it's working OK, then proceed to update: 1) software to the latest; 2) Serial# and Model# of the TV. If the new board is not working OK, you need to update: 1) full software; 2) software to the latest; 3) Serial# ...