HFL5014/6014/5114/6114/5214/6214 IPTV Pixelation

HFL5014/6014/5114/6114/5214/6214 IPTV Pixelation


Ensure multistream is configured as follow:
• TS stream needs to be compatible with DVB standard
• Maximum bit rate 18Mbps
• Encapsulation of 7TS packets per IP frame. Preferably, each UDP packet must contain exactly 7 data chunks otherwise the packet is not parsed and it will get lost
• Multicast addresses need to be within following range: from 224.0.0.0 to 239.255.255.255
• Duplex mode on the switches can be set to full duplex but automatic is recommended, as older products do not support full-duplex mode. When the duplex mode is set to automatic, the mode is determined after negotiation between the TV and switch

IGMP setting matches
[Channel][Channel Settings][IGMP Version for Multicast Channels]
By default, IGMP version 2 will be used. When the switches are configured to a different IGMP version, it is recommended to set the correct version in this menu, as this will improve the zap time.

Office Use Only:
Installation Manual 

    • Related Articles

    • HFL5014/6014/5114/6114 IPTV Showing No Channel

      A couple of things to check: 1. Check if the TV is connected to the network and have an IP Address - Press mute, left, right, up, down, ok to go to professional menu - Navigate to Wireless and Networks -> Settings->View Network Settings Confirm that ...

    • xxHFL5014/6014/5114/6114 IPTV Audio Choppy

      If IPTV Audio sounds choppy.. See example video here https://westanonline.sharepoint.com/:f:/s/Support/EhDbNEPLEeNMvgnYbFzcUJQBm4wjjRB-VFxEZySunJG9MQ?e=9wnp5t Change IPTV Channel setting for the relevant channel(s) in ChannelList.xml from: <Multicast ...

    • xxHFLxx14 How to Update Firmware via CMND

      1. Download firmware from https://support.westan.com.au/portal/en-gb/kb/articles/xxhfl5014-xxhfl6014-xxhfl5114-xxhfl6114-autorun-upg-normal-software-update Make sure the downloaded file's name is 'autorun.upg'. 2. Upload it to CMND: go to 'Files' ...

    • HFL USB Logging

      Step 1. Prepare the USB flash drive Get an empty flash drive and connect it to the PC. In my case the USB flash drive is called “USBFLASH”. In your case it will have a different name. Next step is to format the USB flash drive to FAT32. Select the ...

    • Philips HFL Multi Remote

      Philips Hospitality TV and its remote can be configured to 14 different pair set. (0-9, blue, yellow, green red) A Philips TV can only work with Remote control that matches its remote id. By default both the TV and remote are set to Blue mode To set ...