HFL5014/6014/5114/6114/5214/6214 IPTV Pixelation due to Network Flooding

HFL5014/6014/5114/6114/5214/6214 IPTV Pixelation due to Network Flooding


Please check the following:

1.         Isolation Mode: Check if Client/AP Isolation is enabled in the network. This prevents TVs from communicating with each other and avoids excessive broadcast traffic.

2.         MDNS Optimization: Ensure mDNS proxying is enabled on the network to avoid multicast flooding. The network equipment should have mDNS configuration options to limit or optimize the broadcast domains.

3.         Network Load Segmentation: Use VLANs to isolate TV traffic from other network services and prevent potential multicast issues affecting the overall network.


Office Use: #18687

    • Related Articles

    • HFL5014/6014/5114/6114 IPTV Showing No Channel

      A couple of things to check: 1. Check if the TV is connected to the network and have an IP Address - Press mute, left, right, up, down, ok to go to professional menu - Navigate to Wireless and Networks -> Settings->View Network Settings Confirm that ...

    • xxBDL4150D fail to recognize network connection

      We've experienced issue before where the screen failed to recognise the existence of network connection. This seemed to be due to the VLAN/QoS setting at the switch. solution:  Changed QoS settings to port based and set all to highest priority

    • xxHFL5014/6014/5114/6114 IPTV Audio Choppy

      If IPTV Audio sounds choppy.. See example video here https://westanonline.sharepoint.com/:f:/s/Support/EhDbNEPLEeNMvgnYbFzcUJQBm4wjjRB-VFxEZySunJG9MQ?e=9wnp5t Change IPTV Channel setting for the relevant channel(s) in ChannelList.xml from: <Multicast ...

    • HFL5x14/6x14 IPTV Setup On TV

      Overview IPTV Setup can be done: With CMND - easiest Without CMND - a bit more complex With CMND Ensure a clone file of the Channel List is in CMND You can do this by: - Getting a clone file from the TV through CMND - Uploading a clone file with ...

    • xxHFLxx14 How to Update Firmware via CMND

      1. Download firmware from https://support.westan.com.au/portal/en-gb/kb/articles/xxhfl5014-xxhfl6014-xxhfl5114-xxhfl6114-autorun-upg-normal-software-update Make sure the downloaded file's name is 'autorun.upg'. 2. Upload it to CMND: go to 'Files' ...