HFL5x14/6x14 IPTV Setup On TV

HFL5x14/6x14 IPTV Setup On TV

Overview


IPTV Setup can be done:
With CMND - easiest
Without CMND - a bit more complex

With CMND

Ensure a clone file of the Channel List is in CMND
You can do this by:
- Getting a clone file from the TV through CMND
- Uploading a clone file with Channel List in it (download a sample TPM18HE_CloneData.zip if you don't have one)

Go to the File->Channels Section in CMND
On the file that you just imported into CMND (either by performing clone from a TV through CMND or by uploading the sample TPM18HE_CloneData.zip), click Channels logo (See below) to show the channels definition.
Find the Channel clone file and click Edit

You can add channels, modify channels, etc
(It's automatically saved)

Once done, you can push out the Channel clone back to the TV via CMND or downloading it and uploading it to the TV via USB Cloning method.


Without CMND

Get a clone of the TV Channel List either by downloading a full clone from the TV or by downloading the sample TPM18HE_CloneData.zip from this website
Unzip it.
Navigate to TPM181HE_CloneData\MasterCloneData\ChannelList folder
Edit the ChannelList.xml file
Add/Edit the channel accordingly
        <Channel>
            <Multicast url="multicast://225.1.2.1:1234/0/0/0/VBR"/>
            <Setup FreePKG="1" PayPKG1="0" PayPKG2="0" TTV1="0" TTV10="0" TTV2="0" TTV3="0" TTV4="0" TTV5="0" TTV6="0" TTV7="0" TTV8="0" TTV9="0" blank="0" name="ABC HD" presetnumber="20" skip="0" logo=""/>
        </Channel>

Clone the file back to the TV



    • Related Articles

    • HFL5014/6014/5114/6114 IPTV Showing No Channel

      A couple of things to check: 1. Check if the TV is connected to the network and have an IP Address - Press mute, left, right, up, down, ok to go to professional menu - Navigate to Wireless and Networks -> Settings->View Network Settings Confirm that ...

    • HFL USB Logging

      Step 1. Prepare the USB flash drive Get an empty flash drive and connect it to the PC. In my case the USB flash drive is called “USBFLASH”. In your case it will have a different name. Next step is to format the USB flash drive to FAT32. Select the ...

    • xxHFLxx14 How to Update Firmware via CMND

      1. Download firmware from https://support.westan.com.au/portal/en-gb/kb/articles/xxhfl5014-xxhfl6014-xxhfl5114-xxhfl6114-autorun-upg-normal-software-update Make sure the downloaded file's name is 'autorun.upg'. 2. Upload it to CMND: go to 'Files' ...

    • BFL2114 Setup - Tune in TV channels

      Tuning in Channels Open up the Professional Menu by pressing remote sequence (22AV1905A MUTE-LEFT-RIGHT-UP-DOWN-OK (Professional Menu)) (see video here: https://support.westan.com.au/portal/kb/articles/22av1905a-mute-left-right-up-down-ok) Navigate ...

    • xxHFL5011 xxHFL7011 - Setup TV for USB Playback

      A.   ENABLE USB Media Browser   Open up the Professional Menu by pressing remote sequence (3,1,9,7,5,3,mute in 2 seconds) Navigate to the [Features] -> [USB Media Browser] -> [Enable] = Yes Press back multiple times until you’re out of Professional ...