LightCast Ports for Chrome LightCast Sender to Android

LightCast Ports for Chrome LightCast Sender to Android

Here are the ports for LightCast

Chrome LightCast Sender to Android is WebRTC, here is the port range: 

·         m360.api.splashtop.com: 443 • turn.relay.splashtop.com:443 • wbs.relay.splashtop.com:443 - The 3 server addresses use port 443 and should be entered into the internet firewall allowing it through

 

·         UDP ports: 5000-65534  - The UDP ports are for the internal network communication only. You should not open these ports in or out of the firewall – just not block internally.


    • Related Articles

    • LightCast 3 - Miracast Times Out

      The Miracast connection uses a lot of network resources and the LC3 app is configured that if there is no connection for an hour or if you restart Android device then it resets.  It is a deliberate function to reduce the network resources if users ...

    • Lightcast 2 install Guide

      Windows Download the software below and install either the 32-bit or 64-bit version, depending on your device. [Download LightCast2_v1.5.54_Windows.exe] Android Go to Google Play Store and search for LightCast 2 or download the APK from below and ...

    • LightCast 2 Chrome extension says Checking availability Please wait...

      The issue is happening because the Mondopad PC is going to sleep and when the PC wakes up, it will activate the Wi-Fi module but the LightCast 2 extension in Chrome has lost connection to it and can’t re-establish until a restart. So, restart the ...

    • InFocus 50 Series - How to Remove Android

      Enter the Service Menu by pressing the following buttons on the remote: INPUT, 1, 3, 7, 9 Once in the Service Menu, there is an option to enable and disable Android   => 

    • INFxx33E - Panel/Android Firmware Update

      Warning: Updating the image will remove all of your saved files and installed applications as well as reset the panel settings to factory defaults. Once completed the panel will reboot relaunch just like it was originally for initial setup out of ...