Naim: How does the warranty process work?

Naim: How does the warranty process work?

The Claim Process

Please submit a ticket through the Westan Support ticketing portal in order to have a warranty claim submitted and reviewed. A ticket must be lodged for all faults, failures and non-user related damages, whether you are looking for a replacement or a credit.

Ensure there are no unnecessary delays by following this process:
  1. Create a ticket on the Westan portal for the product.
  2. Record the unique ticket number that you are issued and match this with your job number (we may ask you to send the product to us or a repair agent and you will have to quote this in the delivery).
  3. Upload the customer proof of purchase so we can identify the item's serial number.
  4. We will contact you if we require any further information or to let you know that we are proceeding with your ticket.
  5. We will send you instructions on next steps, e.g. perform in-house tests, send to Westan Australia, send to a service or repair agent.
  6. After inspection and testing, we'll let you know whether the unit is: a) out of warranty (and if it is repairable for a charge); b) repairable under warranty; or c) will be replaced.

What Does Warranty Cover?

Westan covers the full manufacturer's warranty on all Naim products sold by us.
  1. A dead on arrival unit (DOA) can be lodged within 30 days of sale as per either our invoice to you or your invoice to the end user. A DOA is usually replaced with a brand new unit or, if unavailable, we can offer you credit on the purchase. Thereafter, the standard warranty process applies and we'll refer the unit to a technician for a possible repair. 
  2. The reseller is responsible for determining whether a Naim product is legitimately faulty. Please ensure that you have tested all power outlets, and ensured all cables are properly fitted to the unit as an part of initial checks.
  3. When returning faulty products, please ensure all accessories are returned along with the product. Failure to include these items may incur a fee.

    • Related Articles

    • Naim Limited Manufacturer's Warranty

      Westan Australia Pty Ltd (40 111 699 819) (hereafter "Westan") acts as a distributor for the manufacturer of Naim products. Westan offers this warranty against defects for Naim products purchased within Australia under the following conditions. Our ...

    • Naim Troubleshooting and FAQs

      For knowledge base and troubleshooting guides you can refer to the FAQ pages for your Naim product via this links: https://www.naimaudio.com/assistance

    • Muso Gen 2 - Reset Procedure

      Mu-So Gen 2 Factory reset for the unit is - with the unit powered up - pressing the reset pin/bent out paperclip into the reset pinhole (next to the LED status indicator on the side of the unit) and holding for 8-10 seconds, or until the status LED ...

    • Muso Gen 1 Deep Reset Procedure

      The instructions for the deep reset are: 1. Power off the unit at the wall and give it 30 seconds for its power supply to fully discharge. 2. Press the reset pin into the reset hole (next to the LED status indicator) until you feel a slight click, ...