Novastar H9 when using a layout with multiple inputs, if 1 input went to sleep, the whole output went to sleep rather then just the input blacking

Novastar H9 when using a layout with multiple inputs, if 1 input went to sleep, the whole output went to sleep rather then just the input blacking

This issue is usually caused by the Backup Management's Enable device backup and Input Backup being ticked
Untick them as below and the issue should disappear.



Office use only 
#25058


    • Related Articles

    • Novastar Taurus Access

      Overview To access the Novastar Taurus locally, you need to download ViPlex Software, install it in your PC and then connect to the wifi that is being broadcasted by the Taurus Hardware. Once you connect to the Taurus' wifi, you then run the ViPlex ...

    • ViPlex User Manual

      See attached user manual

    • Using ViPlex Express to Create Playlist

      Open ViPlex Express. Click on Solutions. Click on New ⇾ Select Regular Screen On Solution Information dialogue box, click on Specify Terminal, select the Terminal Name to update Width and Height, click OK. On the solution editing screen, click on ...

    • Colorlight Video Processor X and Z Series External Control Protocol

      See document in the link below https://westanonline.sharepoint.com/:f:/s/Support/EkTg8oVisJBMjXptaj5zJPoBkFyEfcD-rBKeHdefG-1KkQ?e=Z8cQ4L

    • I cannot get the screen to power on ?

      Check the circuit breakers and main breaker to ensure the venues power is in fact on and then check the rear of the cabinets to see if there are indicators lights on . Indicator lights on means there is power but no video signal and you need to – • ...