xxBDL4050D (Dragon 1.0) - Network setup

xxBDL4050D (Dragon 1.0) - Network setup

Set Up Screen's Network

Fusion Signage is a cloud base signage solution.
A reliable connection to the Internet is required to ensure that it work properly
Enter Android Menu (Press: Home, 1, 8, 8, 8 [within 2 seconds])

Select “Network”


Select your chosen interface (Wi-Fi or Ethernet)


Select “Enable”

If Wi-Fi, select your network SSID from available list, enter password, and select Connect (use List/Adjust to move cursor between buttons on popup box)

Press “Back” on the remote control (RC) several times if you wish to exit the Android menu completely.


    • Related Articles

    • BFL2x14 Setup - Connect To Network

      Connect To Network Open up the Professional Menu by pressing remote sequence (22AV1905A MUTE-LEFT-RIGHT-UP-DOWN-OK (Professional Menu)) (see video here: https://support.westan.com.au/portal/kb/articles/22av1905a-mute-left-right-up-down-ok) Navigate ...

    • Dragon 1.0 - Setup Guide - Video Wall

      Note: This guide shows you the steps required to set-up a video wall Video wall daisy chaining (passing video signal from one screen to another) must only be done through DVI loop through and/or Display Port loop through. Using the 1st screen's HDMI ...

    • xxBDL4051D (Dragon 1.6) - Fusion Quick Install From Android Clone File

      Download the files and directory structure from the link below and put them into USB Drive (formatted with FAT32) https://westanonline.sharepoint.com/:f:/s/Support/Er2CsRpZgWNQhPr_kocCOrgBiLQkf7pLTcApGaQNkOZflQ?e=cOdade Insert the USB Drive as per ...

    • xxBDL505xP (Dragon 1.5) scheduling setup

      Ensure  Home -> Advanced option -> Power save = Mode 4 Set the Date & Time Home->Advanced option->Date and time  Set Auto sync temporarily to No (so you can change the date and time.)  Set Year, Month, Day, Hour, Minute and Daylight Saving time ...

    • xxBDL4050D, xxBDL4051T, 65BDL3051T (Dragon 1.0) Scheduling Setup

      Ensure  Home -> Advanced option -> Power save = Mode 4 Set the Date & Time Home->Advanced option->Date and time  Set Auto sync temporarily to No (so you can change the date and time.)  Set Year, Month, Day, Hour, Minute and Daylight Saving time ...