xxBDL4050D, xxBDL4051T, 65BDL3051T (Dragon 1.0) - Screen color cycling

Issue

Screen is color cycling like the video below.

This is because its Burn-In mode has been set to On.

to get rid of it, we need to turn the Burn in mode to off.

color cycling

Resolution

Steps:

1. Go into Factory Menu by pressing Home,1,9,9,9,back on the remote

2. Navigate to Burn In Mode setting, set it to off, the color cycling will disappear

 

• Related Articles

• BDL4052E - Screen colour cycling

  Issue Screen is color cycling like the video below. This is because its Burn-In mode has been set to On. to get rid of it, we need to turn the Burn in mode to off. color cycling Resolution Steps: 1. Set the source to HDMI (any) 2. Go into Factory ...

• Philips BDL Remote Control Not Working

  Philips Signage Remote control not working: [1] Are you using the correct remote control (RC)? Part number: 398GRABDDNEPHT, see picture below: See important note at the end of this document [2] The green led must blink when you press the OK button on ...

• Phoenix 1.0 - Video Wall Manual Color Calibration

  1) Turn The Screen On For 30 Minutes with 1080p/60Hz white background. We need to leave the screen running for sometimes to let the brightness and colors stabilize The white background need to be fed using the same interface as the one that will be ...

• BDL - Dragon 1.0 (xxBDL4050D) - Android Module Software Update

  PHILIPS D Line Android Module Software Update Check if the screen is already running the latest Software version (FB11.04). Press in sequence "info, 7, 7", check if the Android FW Version is FB11.04 Download the latest Android firmware: ...

• Dragon 1.0 - Setup Guide - Video Wall

  Note: This guide shows you the steps required to set-up a video wall Video wall daisy chaining (passing video signal from one screen to another) must only be done through DVI loop through and/or Display Port loop through. Using the 1st screen's HDMI ...