BDL4052E - Screen colour cycling

Issue

Screen is color cycling like the video below.

This is because its Burn-In mode has been set to On.

to get rid of it, we need to turn the Burn in mode to off.

color cycling

Resolution

Steps:

1. Set the source to HDMI (any)

2. Go into Factory Menu by pressing Home,1,9,9,9,back on the remote

3. Navigate to the Burn-In Mode setting called Aging mode, and set it to off, and the colour cycling will disappear

 

• Related Articles

• Philips BDL Remote Control Not Working

  Philips Signage Remote control not working: [1] Are you using the correct remote control (RC)? Part number: 398GRABDDNEPHT, see picture below: See important note at the end of this document [2] The green led must blink when you press the OK button on ...

• Colour Calibration Kit CCK4602 – Manual Tuning

  This guide assumes an automated Calibration process has already been completed and you now need to make manual adjustments. It is possible to adjust the backlight and RGB values of each screen manually by selecting “Manual Tuning” in the CMND & ...

• xxBDL4050D, xxBDL4051T, 65BDL3051T (Dragon 1.0) - Screen color cycling

  Issue Screen is color cycling like the video below. This is because its Burn-In mode has been set to On. to get rid of it, we need to turn the Burn in mode to off. color cycling Resolution Steps: 1. Go into Factory Menu by pressing Home,1,9,9,9,back ...

• BDL - Android Base Screen - Logging

  The log file from an android based BDL models can be downloaded via the remote control or via ADB. 1. Via the remote control: Insert an USB stick in the monitor, press “home 1666 back” in a sequence on the remote control > the log file will be copied ...

• BDL - 10BDL4551T - Switching LED Strip to different colour

  Both LED strips of the 10BDL4551T can be switched ON or OFF and set to a particular color. By default, both LED strips are OFF at all times. The left and right LED stripes are controlled at the same time, it is not possible to control only the left ...