xxBDL4150D (Himalaya 2.0) Android SW Upgrade with USB

xxBDL4150D (Himalaya 2.0) Android SW Upgrade with USB

Downloading the Android SW File

Download the Latest firmware :
Copy the update.zip to your usb stick on the root (Do not unzip the file!! )
Insert usb disk to the monitor (this is the android board USB port), different than the scaler USB port.

Inserting the USB onto the Screen





Performing the update

press “home+1+8+8+8” to enter android mode, then choose “settings”


choose “Signage Display”->”System updates”->”Local update”


The system will automatically detect the update.zip file from USB stick, then choose OK, it will upgrade Android FW
itself.


Check if the firmware has been upgraded: press on the RC: Info 77
Philips recommend to do a factory reset after a sw update is performed
HOWEVER.. doing so will wipe out all the apps installed and all the settings in the android SW
most of the time, not doing Factory Reset is not causing issue as well..
If you do have apps running in android, it's best to test the screen's behaviour without doing the factory reset

Factory reset
Signage display > system tools > factory reset
AC repower the monitor when finished.

    • Related Articles

    • xxHFL3009 xxHFL3010 upgrade_loader.pkg (forced) software update

      Warning upgrade_loader.pkg (forced) software update method must be used as a last resort software update method only. autorun.upg (normal) software update is the preferred software update method. ...
    • BDL - Dragon 1.5 (xxBDL5055P xxBDL5057P) - Android Module Software Update

      PHILIPS P Line Android Module Software Update Download the latest android firmware: https://westanonline.sharepoint.com/:f:/s/Support/En4_bUolLahbj4BRjTvfbVwB5BGH-xKnlqVwAUyb0ZoGlg?e=3NmvCP In the root directory of a USB disk place ...
    • xxBDL3550Q Forced upgrade to Latest SW

      1.      Important remote sequence: Factory Menu Home 1999 back Android Menu Home 1888 Enable Remote control (if it is locked) Info for 10 secs Information Info 77   Steps: 1.       Prepare  a  USB  Drive (formatted as FAT16  or  FAT 32) ...
    • xxBDL4150D (Himalaya 2.0) - Fusion Quick Install From Android Clone File

      Download the files and directory structure from the link below and put them into USB Drive (formatted with FAT32) https://westanonline.sharepoint.com/:f:/s/Support/EtKQW3C28K5auZif5TGyirwB2-ZTv9s13z_TYkuPCHc0dA?e=mY1Ayu Insert the USB Drive as per ...
    • xxBDL4150D (Himalaya 2.0) Scaler FW Upgrade with USB

      Checking the Scaler Software Version if it is already running the latest scaler version V1.145) press the home button on the RC, select configuration 2, select Monitor Information Check if the Scaler SW version is V1.145 If it is lower than 1.145, ...