xxBDLxxxx and BDLxxxxxx How to check Model, Serial Number and Software version of the screen using the remote control
Different Philips screen model may have different menu structure, hence different way to get the model, serial number and software version information from the screen.
Type 1:
Models: xxBDL4031D, xxBDL4050D, xxBDL4051D, xxBDL3050Q, xxBDL5055P, xxBDL5057P, 75BDL3000U, BDLxx70xx, 86BDL3012T, 65BDL3010T, 75BDL3010T,
Home (Settings Menu)->Configuration 2->Monitor Information
Type 2:
Models: BDLxx30QL, 65BDL3000Q, BDLxx88XC, BDLxx88XH, BDLxx88XL, xxBDL100xX, xxBDL300xX, etc
Press the info button on the remote control
Type 3:
Models: xxBDL3010Q
Home (Settings Menu)->Option->Monitor Info
Related Articles
HOW TO CHECK THE SERIAL/MODEL NAME/SOFTWARE VERSION ON BDL4105X
To check the serial number from the manual, you typically find it on the "Monitor information" section in the OSD (On-Screen Display) menu. Here’s how you can access it: Use the remote control and press the [MENU] button. Navigate to the ...Philips BDL Remote Control Not Working
Philips Signage Remote control not working: [1] Are you using the correct remote control (RC)? Part number: 398GRABDDNEPHT, see picture below: See important note at the end of this document [2] The green led must blink when you press the OK button on ...BDLxx30QL - Screen can't be controlled using the remote control
Symptoms Screen can turn on, but can't be controlled using the remote control Possible cause: 1. Remote control is set to ID mode 2. Remote control is being pointed to the wrong area of the screen. 3. There's an IR cable (3.5mm cable) in the IR In ...BDL4550D - Screen not responding to Remote Control
Symptoms Screen can turn on but it doesn't respond to the remote control. Main Reasons The following are possible reasons: 1. Wrong remote control is used 2. Remote is set to the wrong mode 3. Remote IR is not emitting light 4. Remote is not being ...BDLxxxxBDL4050D xxBDL4051T 65BDL3051T (Dragon 1.0) - Screen can't be controlled using the remote control
Symptoms Screen can turn on, but can't be controlled using the remote control Possible cause: 1. Remote control is set to ID mode 2. Remote control is being pointed to the wrong area of the screen. 3. There's an IR cable (3.5mm cable) in the IR In ...