xxHFL2889 Reset TV back to First Time Installation
Overview
The Reset TV option is available only in the Normal TV Menu when Hotel TV Mode is disabled.
To be able to get the TV SW Version we need to:
- Turn Hotel Mode off
- Invoke First Time Installation
Getting the SW Version Using Normal TV Remote control
xxHFL2889 TV remote is different to most other Philips HFL TV Remote and BDL remote
Ensure that you are using the correct remote control
Steps:
- Turn Hotel Mode off
Go to Hotel TV Menu (3,1,9,5,7,3 mute)
Turn Hotel Mode off
Exit Hotel TV Menu
- Invoke First Time Installation
Press House Button->Installation->First Time Installation
Getting the SW Version Using Light Green Philips Service Remote control
Steps:
- Setup the Light Green Service Remote to RC5 xxHFL2889 codes
Press RC5 Guest, then press 1 and A simultaneously
- Turn Hotel Mode off
Press the middle double cog button to bring up the Hotel TV Menu
Turn Hotel Mode off
Exit Hotel TV Menu
- Invoke First Time Installation
Press House Button->Installation->First Time Installation
Press the left House button -> Installation->First Time Installation
SW Version can be seen under either "Software upgrade" and "Application Version"
Exit Normal TV Menu when done
- Setup the Light Green Service Remote to RC5 NON xxHFL2889 codes
Press RC5 Guest, then press 1 and B simultaneously
Related Articles
xxHFL7011 xxHFL7111 NVM Reset Procedure
Introduction NVM (Non Volatile Memory) Reset Procedure overwrite the NVM memory area with a model specific NVM image that is usually loaded during the TV's assembly process. The NVM image used is dictated by the LCD component (the front part of the ...xxHFL5011 NVM Reset Procedure
Introduction NVM (Non Volatile Memory) Reset Procedure overwrite the NVM memory area with a model specific NVM image that is usually loaded during the TV's assembly process. The NVM image used is dictated by the LCD component (the front part of the ...xxHFL5x14 xxHFL6x14 TV Shows "Factory Mode" Message when booted up for the first time.
Please help to send the following info for each TV with the "Factory Mode" issue to Westan Support support@westan.com.au so we can report them to Philips. - photo/video of what's shown on the TV (with the message Factory Mode - photo of Serial Number ...xxHFL5009, xxHFL5010, xxHFL7009 NVM Reset Procedure
Introduction NVM (Non Volatile Memory) Reset Procedure overwrite the NVM memory area with a model specific NVM image that is usually loaded during the TV's assembly process. The NVM image used is dictated by the LCD component (the front part of the ...CMND Reception - Installation & Troubleshooting Guide
For a full guide, refer to the CMND Reception Manual that can be downloaded from cmnd.io website Licence Registration Process Purchase CMND Reception License from Westan and obtain a Location Activation Code (LAC). It may take up to five business ...