This guide shows you the basic steps required on your xxHFL4014 models to ensure it runs the latest Software and also covers common steps required to be done with new TV sets such as “Tuning in Channels” and “Setting the default TV channel every time the TV turns on”
Useful info:
Important remote sequence:
Professional Menu 319753mute
CSM Menu 123654
Note:
For brand new site:
- For 1st TV, do step A-E
- For subsequent TVs, do step H
A. Download SW to update the TV to the Latest SW
Copy the autorun.upg file into the root directory of the USB Drive. (please ensure that the file is named autorun.upg and not autorun(1).upg or some other name that Windows may give)
B. Virgin TV SW Update and Initial Settings
1. Turn the TV On, you’ll see the “Instant Initial Cloning” Page
2. Plug the USB into the TV (USB is located at the back of the TV)
3. Software Update will happen automatically. Wait until it finish (approximately 5 minutes).
4. Wait for the TV to restart, unplug the USB, then press “Skip” on the on screen display.
5. Language = [English] (press OK to move to next page)
6. Country = [Australia] (press OK to move to next page)
7. Picture Style = [Natural] (press OK to move to next page)
8. Professional Mode = [On] (press OK to move to next page)
9. Room ID = [00000 – 99999] (set correctly) (press OK to move to next page)
C. Tuning In Channels
1. Open up the Professional Menu by pressing remote sequence (“3,1,9,7,5,3,mute” within 2 seconds)
2. Navigate to the [Channels] -> [RF Installation Settings]
[Install Analogue] = Off
[Install DVB-T/T2] = On
[Install DVB-C] = Off
3. Navigate to [Channels] -> [RF Channel Installation] -> [Search for Channel]
4. Select [Re-install Channels], Press [OK]
5. Select [Australia], Press [OK]
6. Press [Start] (this will take sometimes.. usually over 5 minutes depending on area)
7. When finish, click [Done]
D. Recommended Settings
1. Open up the Professional Menu by pressing remote sequence (“3,1,9,7,5,3,mute” within 2 seconds)
2. Set [General Settings]->[Sound]->[Advanced]->[Maximum Volume]=30
3. Set [Switch On Settings]->[Channel Settings]->[Switch On Channel]= 70
4. Set [Switch On Settings]->[Feature Settings]->[Switch On Feature]= None
5. Set [Switch On Settings]->[Sound Settings]->[Volume]->[TV Speakers]= 30
6. Set [Identification Settings]->[RoomID] = (Set accordingly)
7. Set [Date&Time]->[Source]=Automatic-Channels
8. Set [Date&Time]->[Source Channel]=70 (same as Switch On Channel’s channel)
9. Set [Date&Time]->[Time Zone Settings]=Australia
10. Set [Feature Settings]->[Date&Time]->[Timezone Region]=Victoria (or as appropriate)
11. Set [Advanced]->[Professional Mode] = On
13. Set [Advanced]->[Power]->[Standby Mode]=Fast
14. Set [Advanced]->[Power]->[Auto Standby]= (Hotel room-On, other area - off)
E. Creating TV Clone File (exporting config to USB)
1. Put a USB Drive (formatted as FAT32 with allocation = 64kilobytes) into the TV
2. Open up the Professional Menu by pressing remote sequence (“3,1,9,7,5,3,mute” within 2 seconds)
3. Navigate to the [Upgrade and Clone]->[Clone TV to USB]->[Clone All]
F. Applying TV Clone File (importing config from USB)
1. Put a USB Drive with clone file (for the same model and SW version) into the TV
2. Open up the Professional Menu by pressing remote sequence (“3,1,9,7,5,3,mute” within 2 seconds)
3. Navigate to the [Upgrade and Clone]-> [Clone USB to TV]
G. Reset The TV
1. If you need to reset the TV to start from the very beginning, this is the step.
2. Open up the Professional Menu by pressing remote sequence (“3,1,9,7,5,3,mute” in 2 seconds)
3. Navigate to the [Reset]->[Reinstall TV]->[Yes]
H. Fast Tracking TV Install with SW Update and Clone folder
If you have the SW Update file and Clone Folder (generated by step), for the subsequent TV:
1. Put both SW Update [Step A] and Clone folder [Step E] in the root directory of a USB Drive (formatted in FAT32 and allocation=64kb)
2. Insert USB in TV
3. Power on TV.
4. TV Should update SW and automatically pick up the clone file.
5. Open up the Professional Menu by pressing remote sequence (“3,1,9,7,5,3,mute” in 2 seconds)
6. Set [Identification Settings]->[RoomID] = (Set accordingly)