xxHFL5014/6014/5114/6114 IPTV Audio Choppy

xxHFL5014/6014/5114/6114 IPTV Audio Choppy

If IPTV Audio sounds choppy..
See example video here

Change IPTV Channel setting for the relevant channel(s) in ChannelList.xml
from:
<Multicast url="multicast://239.200.0.1:1234/0/0/0/VBR" />
to:
<Multicast url="multicast://239.200.0.1:1234/0/0/0/VBR/AVSyncOption=Advanced " />.


Office use only:
#9923


    • Related Articles

    • xxHFL5011/7011 Troubleshooting TV Has No Audio

      Problem: TV has no audio Possible Cause and Solution 1. TV speaker is set to off or volume is set to 0 Check the following settings: Prof Menu -> Sound->Sound Management -> TV Speakers = ON Prof Menu -> Sound->Maximum Volume = set accordingly Prof ...
    • xxHFL5x14 xxHFL6x14 Troubleshooting TV Has No Audio

      Problem: TV has no audio Possible Cause and Solution 1. TV speaker is set to off or volume is set to 0 Check the following settings: Prof Menu -> TV Settings -> Sound -> Sound Management -> TV Speakers = ON Prof Menu -> TV Settings -> Sound -> ...
    • HFL5014/6014/5114/6114 IPTV Showing No Channel

      A couple of things to check: 1. Check if the TV is connected to the network and have an IP Address - Press mute, left, right, up, down, ok to go to professional menu - Navigate to Wireless and Networks -> Settings->View Network Settings Confirm that ...
    • BDL3550Q - Static Noise from 3.5mm audio interface

      We've received report that some audio device will generate static noise when connected to the screen's 3.5mm audio jack. Easiest solution to get around this problem is to put a "Ground loop isolator" between the screen and the audio device
    • BDL4550D - Static Noise from 3.5mm audio interface

      We've received report that some audio device will generate static noise when connected to the screen's 3.5mm audio jack. Easiest solution to get around this problem is to put a "Ground loop isolator" between the screen and the audio device