xxHFL5014 xxHFL6014 - No Australia in the channel country selection list

xxHFL5014 xxHFL6014 - No Australia in the channel country selection list

Check that Professional Mode is ON

If AU is still missing, this can be solved by either:
  1. performing NVM Reset procedure https://support.westan.com.au/portal/en-gb/kb/articles/hfl5x14-hfl6x14-nvm-reset-procedure
  2. turning professional mode on but don't reinstall

    • Related Articles

    • xxHFL3011 Can't tune UHF channels

      Issue: xxHL3011T can't tune UHF channels This is a known issue in earlier version of the xxHFL3011 Software which is fixed in version  Solution: Update the TV Software to the latest version ...

    • Philips Hospitality Television - TigerTMS supported PMS vendor list

      Please note that switching PMS vendors once the TigerTMS iLink solution is deployed will attract an additional re-installation fee. PMS Vendor  Interface Type  Interface Module  ABACUS File-based Charges Only Interface Manager AMADEUS Serial or IP HI ...

    • BFL2x14 - How To Change HDMI / Channel Names

      Configuration Check Press MUTE-LEFT-RIGHT-UP-DOWN-OK (within 2 seconds to Open up the Professional Menu) (see video here: https://support.westan.com.au/portal/kb/articles/22av1905a-mute-left-right-up-down-ok) Navigate to [Channels]-> [Manage] Find ...

    • HFL5014/6014/5114/6114 IPTV Showing No Channel

      A couple of things to check: 1. Check if the TV is connected to the network and have an IP Address - Press mute, left, right, up, down, ok to go to professional menu - Navigate to Wireless and Networks -> Settings->View Network Settings Confirm that ...

    • xxHFL5x14 xxHFL6x14 Configuration to remove apps and non channel sources from the Home Screen

      For other TV Settings guide including updating the TV Software, please refer to this article xxHFL5014 xxHFL6014 xxHFL5114 xxHFL6114 Setup - Standalone, free to air TV channels only ...