Focal | Bathys | Knowledge Base

Bathys
Focal Bathys Forced Shutdown
Forced shutdown To carry out a forced shutdown on the headphones, press the “+”, “-” and “ANC” buttons at the same time. The latest settings used on the headphones will be stored.
Focal Bathys - Restoring to Factory settings.
Restoring the factory settings To restore the factory settings on the headphones, press and hold the “–” and “ANC” buttons at the same time for 8 seconds. Everything saved on the headphones will be deleted.

Popular Articles
If your Polk Signa S1 or S2 will not connect to your subwoofer
The Signa S1 sound bar and wireless subwoofer are preset at the factory to work together. Should your wireless subwoofer stop receiving an audio signal, follow these instructions to re-establish the connection: 1. Turn on your sound bar. 2. Press and ...
Polk SignaS2 Factory Reset procedure
To reset your device: - turn it on - press and hold the button "POWER", "SOURCE" and "VOL+" on the top of the product for at least 10 seconds. - After this, all settings of the Bar are erased.
MagniFi Mini - How to reconnect your Subwoofer
NOTE: The MagniFi Mini sound bar and wireless subwoofer are preset at the factory to work together. Should your wireless subwoofer stop receiving an audio signal, follow these instructions to re-establish the connection: 1. Turn on your sound bar. On ...
xxHFL5011 NVM Reset Procedure
Introduction NVM (Non Volatile Memory) Reset Procedure overwrite the NVM memory area with a model specific NVM image that is usually loaded during the TV's assembly process. The NVM image used is dictated by the LCD component (the front part of the ...
BDL8051C - How to Unlock and Lock Touch
How to Unlock a "Touch Locked" Screen When Touch Locked, it will prompt for Password Default password is 123 (in earlier production run, the code was 666 - so try that too) If the touch lock password has been changed, you need to either: - contact ...

Bathys