Popular Articles
If your Polk Signa S1 or S2 will not connect to your subwoofer
The Signa S1 sound bar and wireless subwoofer are preset at the factory to work together. Should your wireless subwoofer stop receiving an audio signal, follow these instructions to re-establish the connection: 1. Turn on your sound bar. 2. Press and ...
Polk SignaS2 Factory Reset procedure
To reset your device: - turn it on - press and hold the button "POWER", "SOURCE" and "VOL+" on the top of the product for at least 10 seconds. - After this, all settings of the Bar are erased.
MagniFi Mini - How to reconnect your Subwoofer
NOTE: The MagniFi Mini sound bar and wireless subwoofer are preset at the factory to work together. Should your wireless subwoofer stop receiving an audio signal, follow these instructions to re-establish the connection: 1. Turn on your sound bar. On ...
Muso Gen 1 Deep Reset Procedure
The instructions for the deep reset are: 1. Power off the unit at the wall and give it 30 seconds for its power supply to fully discharge. 2. Press the reset pin into the reset hole (next to the LED status indicator) until you feel a slight click, ...
xxHFL5011 NVM Reset Procedure
Introduction NVM (Non Volatile Memory) Reset Procedure overwrite the NVM memory area with a model specific NVM image that is usually loaded during the TV's assembly process. The NVM image used is dictated by the LCD component (the front part of the ...