Model |
Main Board |
Note |
BPRSG8BBT4S |
Need to check based on SN |
|
55HFL7011T |
BPRSG8BBT4S |
Need to check based on SN |
55HFL7011T |
BPRSG8BBT5S |
Need to check based on SN |
65HFL7011T |
BPRSG8BBT3S |
Need to check based on SN |
Useful info:
1. See position of main board in service manual in the link below
Factory Menu |
Home 1999 back |
Professional Menu |
319753mute |
SAM Menu |
062596OK(or info) Professional Menu must be set to off. Professional Menu->Professional Settings->Professional Mode=Off |
CSM Menu |
123654 |
3.
Steps:
1. Install new Main board
2. Turn screen on
3. Perform NVM Reset Procedure
https://support.westan.com.au/portal/en-gb/kb/articles/xxhfl7011-xxhfl7111-nvm-reset-procedure
Turn professional mode off: 319753mute->Advanced ->Professional Mode=Off
Go into SAM Menu by pressing this sequence: 0,6,2,5,9,6,i+
(If all the options are greyed out, please press back and then go into SAM Menu again)
Go to NVM Editor
Go to Service Data
Amend the Type Number (Model) accordingly
Amend the Production Number (S/N) accordingly
Press back many times to quit the SAM Menu
Turn professional mode on: 319753mute->Advanced ->Professional Mode=On