BDL3117P - SDM-L Configuring Auto-start App
Alert
SDM-L can't be controlled using Philips remote control.
To control it you need to connect a USB Keyboard and Mouse
Prerequisite
Android build number must be SDB801-10.0-HDMI-FP20230817 or later
Check SDM-L Android Build Number
Click the "Setting Cog"
In the Search Bar at the top, type "about" and click the "About tablet"result
Build number must be SDB801-10.0-HDMI-FP20230817 or later
Update to the latest build number
If the SW version is not SDB801-10.0-HDMI-FP20230817 or later, please perform the sdm-l andorid fw re-image using usb-a to usb-a cable to the latest FW version
Seting Up Auto-Start App
Click The Setting Cog
Click "Accessibility"
Click "Boot the application"
Click "Select startup application"
Then choose the app that you want to run when android boot up
Done, you can quit the menu
Related Articles
BDL3117P - SDM-L Installing App
Alert SDM-L can't be controlled using Philips remote control. To control it you need to connect a USB Keyboard and Mouse Preparation Download the apk and copy it to the root directory of a USB Drive formatted with FAT32 Format BDL3117P - connect ...BDL3117P - SDM-L Installing and Setting Up Fusion
Alert SDM-L can't be controlled using Philips remote control. To control it you need to connect a USB Keyboard and Mouse Preparation Download the Fusion Signage 2.4.0 from the following link ...BDL3117P - SDM-L Installation and Basic Config
Preparing The SDM-L Setup SDM-L (see below) Install the SDM-L in the SDM-L slot (see below) Configure the xxBDL3117P screen source to SDM-L upon start up Set Source to SDM Menu (press the HOME button on the remote control) ⇾ Configuration 1 ⇾ Switch ...BDL3117P - SDM-L Installing TeamViewer Host
Alert SDM-L can't be controlled using Philips remote control. To control it you need to connect a USB Keyboard and Mouse Preparation Download Teamviewer Host APK from the following link https://download.teamviewer.com/download/TeamViewerHost.apk Copy ...BDL3117P - SDM-L Android SW Re-Image using USB A to USB A cable
Warning As the Android SW is re-imaged, any existing app and configuration that's been done will be erased and reset SDM-L Android SW Re-Image involves pressing a small button on the SDM-L Hardware itself This necessitate the removal of the Philips ...