BDL3117P Setting Up SICP over IP

BDL3117P Setting Up SICP over IP

Ensure the following settings are set
Configuration 1->RS232 routing = LAN->RS232
Network Settings - set accordingly
Advanced->Power Mode = Mode 3

BDL SICP Commonly Used Protocol (V 1.89 onwards)

    • Related Articles

    • BFL2x14, HFL5x14, HFL6x14 - IP Control via SICP

      This article is applicable for: BFL2x14, HFL5x14, HFL6x14. SICP Protocol over IP for the model above is only supported on the TV FW R205.001.099.000 version onwards SICP Protocol over IP to change the source to custom source (like in BDL Models) is ...

    • BDL3511Q Setting Up SICP over IP

      Ensure the following settings are set Configuration 1->RS232 routing = LAN->RS232 Network Settings - set accordingly Advanced->Power Mode = Mode 3 BDL SICP Commonly Used Protocol (V 1.89 onwards) ...

    • 55BDL4002H 75BDL4003H Setting Up SICP over IP

      Ensure the following settings are set Configuration 1->RS232 routing = LAN->RS232 Network Settings - set accordingly Advanced->Power Mode = Mode 3 BDL SICP Commonly Used Protocol (V 1.89 onwards) ...

    • BFL2x14 IP Control via SICP

      Please see this article https://support.westan.com.au/portal/en-gb/kb/articles/bfl2x14-hfl5x14-hfl6x14-ip-control-via-sicp

    • HFL5x14, HFL6x14 IP Control via SICP

      Please see this article https://support.westan.com.au/portal/en-gb/kb/articles/bfl2x14-hfl5x14-hfl6x14-ip-control-via-sicp