Fusion Signage is a cloud base signage solution.

A reliable connection to the Internet is required to ensure that it work properly.

1. Enter Android Menu (Press: Home, 1, 8, 8, 8 [within 2 seconds])
   
2. Select Network
   
3. Select your chosen interface (Wi-Fi or Ethernet)
   
4. Select Enable.
   If using Wi-Fi, select your network SSID from available list, enter password, and select Connect (use List/Adjust to move cursor between buttons on popup box)
5. Press the Back button on the remote control (RC) several times if you wish to exit the Android menu completely.
   

Download Vivi

1. Download Vivi APK from this link ViviReceiverApp-3.3.6-philipstest.3 https://westanonline.sharepoint.com/:f:/s/Support/Eqak9d06fXZFq8ie1MXKo60BR4w3p3wqROuL3lH9Aqdl5g?e=8iMmQW
2. Copy the .apk file to the root directory of the USB Drive

Install Vivi APK

1. Insert USB drive to the bottom USB port on the side I/O panel
   
   
2. Enter Android Menu (Press: Home, 1, 8, 8, 8 [within 2 seconds])
   
3. Select Apps
   
4. Select File Manager
   
5. Select USB drive
   
6. Select the Vivi .apk file and press OK ⇾ select Open and press OK ⇾ Install
   
7. If the following message pops up, select Settings.
   
8. Set Allow from this source setting to On ⇾ press the BACK button to go back to the Fusion Signage installation screen.
   
9. Set Settings->Security->Unknown Sources = Enable
10. Select Install to install Fusion and once installed, select Done.
    
11. Press the BACK on the RC several times if you wish to exit the Android menu completely.
    

Assign Fusion Signage as the "Custom" Input Source

1. Enter Android Menu (Press: Home, 1, 8, 8, 8 [within 2 seconds])
   
2. Navigate to Settings ⇾ Signage Display ⇾ Source Settings ⇾ Custom App ⇾ Select App ⇾ press OK
   
3. Select Vivi from the popup list of apps, the select Save.
   
   
   
   
   
   
4. Press the Back button on the RC several times if you wish to exit the Android menu completely.
   

Set Date & Time

1. Press the Home button to access the screen menu
   
2. Navigate to Advanced option ⇾ Date and time, press OK
   
3. Ensure Auto Sync setting is ticket.
   
4. Select the correct time zone.
   
   

Configure Screen's Non-Android Settings

Set the screen to automatically turn on after an unplanned power outage:

1. Press the Home button to access the screen menu
   
2. Configuration 1 ⇾ Switch on state = Force On
   
3. Configuration 1 ⇾ Boot on source = Action, press OK ⇒ Input = Custom
   
4. Advanced option ⇾ Power Save = Mode 1
   
5. Advanced option ⇾ Off Timer = Off
   

1. Option 1 - Running Vivi by Power OFF/ON screen to autoload app
   Once all the steps above have been action-ed, power off/on the screen with the remote control to complete the installation and auto-load the app.
2. Option 2 - Running Vivi Using The Source Button
   Press the Source button
   Navigate to Custom ⇾ press OK
   Vivi should start, if it doesn't, review the steps above