Customer B - BDL4050D Fusion Signage is saying "error communicating with servers, will try again soon"

Customer B - BDL4050D Fusion Signage is saying "error communicating with servers, will try again soon"

The error message "error communicating with servers, will try again soon" usually means that the fusion app running on the screen has a timestamp that doesn't match the server.

Pls check the following settings
Home -> Advanced option -> Date and time
Set Auto Sync = YES

    • Related Articles

    • Customer B - BDL4050D Fusion Signage Menu Board Common Issues

      Content Are Not Updating Ensure screen is connected to the Local Wifi - click here If the screen status is offline although it is connected to local wifi, there's a possibility that the customer's LAN doesn't connect to the internet. Please try ...

    • BDL4650D - Clone Process for Fusion

      Prepare USB Drive with the Clone content Prepare USB flash drive formatted in FAT32 format (preferably 16 GB) Download USB content from the link below ...

    • BDL3650Q - Clone Process for Fusion

      Prepare USB Drive with the Clone content Prepare USB flash drive formatted in FAT32 format (preferably 16 GB) Download USB content from the link below ...

    • BDL4550D - Firmware Update and Fusion Quick Install from Clone File

      Requirements USB flash drive in FAT32 format (preferably 16 GB) Files to download Latest firmware (v FB02.28): https://westanonline.sharepoint.com/:f:/s/Support/EqDGdRhBpnxZja8hfVftqwkBi_QdbCa8yEFtVUqdqfYAsw?e=U7sX8O Clone file: ...

    • Philips BDL Remote Control Not Working

      Philips Signage Remote control not working: [1] Are you using the correct remote control (RC)? Part number: 398GRABDDNEPHT, see picture below: See important note at the end of this document [2] The green led must blink when you press the OK button on ...