FSMPv2 - Device appears offline

FSMPv2 - Device appears offline

Press the OK button to bring up the Fusion Signage menu
If you see the word "offline" that means the Fusion Signage is not connected to the internet.
Check that you can access the internet from the device by:
- Pressing the Home button
- Navigate to the Android menu icon (six dots icon) and press OK
- Select Chrome and press OK
- Try to open up www.westan.com.au
- If you can't connect to Westan's website, please consult with your IT department to ensure that the device connection to the internet is not blocked.
- You may also want to try to reset the device and try to set it up again.
   https://support.westan.com.au/portal/en-gb/kb/articles/fsmpv2-reset-the-device

    • Related Articles

    • FSMP - Reset the device

      Resetting the FSMP will erase wifi configuration and Fusion signage identity. You need to reconfigure the wifi and then you'll get a new Fusion signage identity. Because of this, you'll also need to: - delete the old Fusion signage identity from your ...

    • FSMPv2 - Reset The Device

      Resetting the FSMP will erase wifi configuration and Fusion signage identity. You need to reconfigure the wifi and then you'll get a new Fusion signage identity. Because of this, you'll also need to: - delete the old Fusion signage identity from your ...

    • FSMPv2 - Hard Reset The Device

      Resetting the FSMP will erase wifi configuration and Fusion signage identity. You need to reconfigure the wifi and then you'll get a new Fusion signage identity. Because of this, you'll also need to: - delete the old Fusion signage identity from your ...

    • FSMPv2 - Video Appears pinkish when connected to a non LED screen

      This is a known issue which is fixed with FSMPv2 20221111 or later Latest SW and update procedure can be found in this article https://support.westan.com.au/portal/en-gb/kb/articles/fsmpv2-updating-the-sw Office Use Only: #8639

    • FSMPv2 - When device is set to portrait in the device rotation, it always revert back to landscape after reboot (when using a non-fusion app)

      This is a known issue which is fixed with FSMPv2 20221202 or later Latest SW and update procedure can be found in this article https://support.westan.com.au/portal/en-gb/kb/articles/fsmpv2-updating-the-sw Office Use Only: #9928