FSMPv2 - Video Doesn't Appear on Aurora LED Screen
This is a known issue which is fixed with FSMPv2 11.0_20250519
Please update the FW to this update_fusion-11.0_20250519
To do the update:
FORMAT a USB Drive with FAT32
Download update.zip
Copy the update.zip file to the root directory of a USB Drive
Insert USB into FSMPv2
The Device will recognize the update.zip in the USB, and prompt if you want to install it.
(to highlight “Install” SW update, I had to press down button on the FSMPv2 remote 3x when the prompt appear)
Press DOWN, DOWN, DOWN on the remote until the "Install" button is highlighted.
Then press OK to begin install
The FSMPv2 will reboot, remove the USB Drive when SW update is complete
Office Use Only:
#8089
Related Articles
Configuring FS-AP-01 Player for Aurora 84" Portrait LED Screen (LCG192025HB/LCG192025HBi)
Tools required: Normal 1080p monitor, with female DVI interface Female HDMI to male DVI cable USB Keyboard and Mouse Or the Player (FS-AP-01) remote control Internet connection - Either via LAN - require ethernet cable - Or via Wifi To connect player ...FSMPv2 - Video Appears pinkish when connected to a non LED screen
This is a known issue which is fixed with FSMPv2 20221111 or later Latest SW and update procedure can be found in this article https://support.westan.com.au/portal/en-gb/kb/articles/fsmpv2-updating-the-sw Office Use Only: #8639FSMPv2 - Audio doesn't get relayed to the Monitor/Screen via HDMI
Later version of the SW for FSMPv2 has been configured to comply with DVI standard which doesn't carry audio in it. This is to ensure compatibility with Aurora LED Screen. In order to relay audio to the monitor (non Aurora LED) via HDMI, the FSMPv2 ...FSMP - Connecting to new wifi
Make sure: - You are using the FSMP Remote - the remote has a working battery - point the remote to the FSMP device (NOT THE SCREEN) Press the OK button to bring up the Fusion Signage menu Select Settings, then click OK Select Wifi Settings, then ...FSMPv2 - Connecting to new wifi
Make sure: - You are using the FSMP Remote - the remote has a working battery - point the remote to the FSMP device (NOT THE SCREEN) Press the OK button to bring up the Fusion Signage menu Select Settings, then click OK Select Wifi Settings, then ...