How to Install Windows OS on new OPS PCs

How to Install Windows OS on new OPS PCs

The Windows operating system is not installed on the following OPS PCs. Therefore, when you start the InFocus screen after installing the Mondopad PC, the PC will stop on the BIOS screen.

OPS-i5-1135G7-8256
OPS-i7-1165G7-16256
PC-i5-10400-8256
PC-i7-10700-16256

To install Windows OS, please follow these steps:
  1. On a computer, go to https://www.microsoft.com/en-au/software-download/windows10
  2. Download and run the media creation tool
    1. Select Create installation media
    2. Download the ISO file for
      1. Language = Engligh (United States)
      2. Edition = Windows 10
      3. Architecture = 64-bit (x64)
  3. Plug in a USB flash drive to the computer and select the USB flash drive to create a bootable flash drive
  4. Once the bootable flash drive has been created, plug in the USB flash drive into the OPS PC
  5. Change the boot device to the USB flash drive
  6. Save BIOS settings
  7. Follow on-screen instructions to create a new hard drive partition and install Windows 10 Pro edition
See the following guide to configure Windows OS:

Once Windows OS has been set up, be sure to install all available Windows Updates and Optional Updates, which includes device drivers for hardware components.

    • Related Articles

    • How to (Re)Install Windows 10 and MondoPad Ultra software

      Preparation Retrieve the existing Windows OS license key as you will need it to activate the new installation. Retrieve the existing MondoPad license key if you are planning on continuing the subscription after the reinstallation. ...
    • Mondopad Ultra v5 Software

      Download link: [Latest] If upgrading from v4 to v5, open a web browser on the Mondopad PC and download directly to the PC by going to https://bit.ly/3bVQz3P If Mondopad software is currently running, exit the application.       (Click on Settings => ...
    • Steps to Replace an Existing Mondopad PC

      On the existing MP installation: Copy the current Mondopad license code. See https://support.westan.com.au/portal/en-gb/kb/articles/how-to-retrieve-the-mondopad-ultra-license-key Copy the current configuration (optional and good to have, if any ...
    • InFocus 40 Series - How to Set Up a New Mondopad v5 PC

      When purchasing a Mondopad you will receive a screen and a PC. It is recommended you plug in a keyboard and mouse for easier installation. Make sure the screen is unplugged from the wall. Slot the PC into the screen on the Right side of the panel, ...
    • Install and activate the Mondopad software

      Mondopad displays+PC module are not preinstalled with the Mondopad software. You will need to download the latest version of Mondopad software https://infocus.com/software/mpultra/​     Refer page 8 of the Mondopad Software guide - Install and ...