InFocus 40 Series - How to Set Up a New Mondopad v5 PC

InFocus 40 Series - How to Set Up a New Mondopad v5 PC

When purchasing a Mondopad you will receive a screen and a PC.
It is recommended you plug in a keyboard and mouse for easier installation.

  1.  Make sure the screen is unplugged from the wall.
  2. Slot the PC into the screen on the Right side of the panel, you will have to unscrew a small metal plate protecting the slot.
    HINT!: We recommend that you connect an Ethernet cable to the PC so that Windows OS can update during setup, including Wi-Fi drivers.
  3. Turn on the power to the screen, select the PC input

  4. The PC will boot up for the first time, select the region you are in  (eg New Zealand)
    ALERT!: If the PC stops on the BIOS screen and won't proceed to load Windows, please see the below guide to install Windows OS:
    https://support.westan.com.au/portal/en-gb/kb/articles/how-to-install-windows-os-on-new-ops-pcs
  5. Select the US keyboard layout
  6. Skip if you don't wish to add a second keyboard layout
  7. Select "I don't have internet". in the bottom left corner
  8. Select "Continue with limited setup"
  9. Accept the Windows 10 License Agreement
  10. Type in the user name as 'Admin' it will not accept Administrator 
  11. Leave the Password field blank and select next
  12. Accept the default privacy settings
  13. The PC will take several minutes to set up the rest of the PC. the Input may handshake. 
  14. The PC will open up to the default internet browser, connect to you local network
  15. Download the latest version of the Mondopad Software, this will take several minutes
    https://westanonline.sharepoint.com/:f:/s/Support/EhP2Z1D7nFpMsGRrYqfkbGoBDZNBEdj2spvz_yvzRByunA?e=zJ6ape
  16. Right-click on the EXE file and select 'Run as administrator'
  17. Select Next through the installation wizard.
  18. Finally to make sure the PC runs smoothly, download and install any available updates for the Windows 10 Device, under Settings > Update and Security > Windows Update
    If you have a Windows 10 activation key activate it under Settings > Update and Security > Activation

    Note: Windows updates may take several hours, with multiple restarts required. Never unplug the screen and PC from the power




    • Related Articles

    • How to Install Windows OS on new OPS PCs

      The Windows operating system is not installed on the following OPS PCs. Therefore, when you start the InFocus screen after installing the Mondopad PC, the PC will stop on the BIOS screen. OPS-i5-1135G7-8256 OPS-i7-1165G7-16256 PC-i5-10400-8256 ...

    • Mondopad Ultra v5 Software

      Download link: [Latest] If upgrading from v4 to v5, open a web browser on the Mondopad PC and download directly to the PC by going to https://bit.ly/3bVQz3P If Mondopad software is currently running, exit the application.       (Click on Settings => ...

    • How to (Re)Install Windows 10 and MondoPad Ultra software

      Preparation Retrieve the existing Windows OS license key as you will need it to activate the new installation. Retrieve the existing MondoPad license key if you are planning on continuing the subscription after the reinstallation. ...

    • Steps to Replace an Existing Mondopad PC

      On the existing MP installation: Copy the current Mondopad license code. See https://support.westan.com.au/portal/en-gb/kb/articles/how-to-retrieve-the-mondopad-ultra-license-key Copy the current configuration (optional and good to have, if any ...

    • InFocus INFxx00 Series - Documents

      Click on the corresponding file at the bottom of this page to download it. 00-Series Family Datasheet: InFocus_INFxx00_Series_Family_Datasheet.pdf Engineering drawings: 65": InFocus_INF6500_Engineering_Drawings.pdf ...