InFocus INF6513 Series — RS232 Control Commands

InFocus INF6513 Series — RS232 Control Commands

Serial Port Settings

Baud Rate38400 bps
Data Bits8 bit
Stop Bits1 bit
Parity / Flow ControlNone
Code FormatHex
Cable TypeDirect (straight-through)

Reading a Command

Every command is a 5-byte hex string. Replace XX with the panel's ID:

01FF  targets one specific panel by ID.
00  broadcasts the command to all panels.

55  XX  CMD  DATA  SUM

The final byte is a checksum. Send the bytes exactly as listed below.

Before You Start

These codes apply to the current-generation INF6513 panel. If a control or automation system was previously programmed for an earlier or now-superseded InFocus model, those older RS232 codes will not map across — the command set differs between generations. When integrating or re-integrating a INF6513, program the control system against the values in this article rather than reusing a previous panel's codes.

Command Reference
Power
Power On55 XX 8E 00 E3
Power Off55 XX 8E 0F F2
Navigation
Up55 XX 00 01 56
Down55 XX 00 02 57
Left55 XX 00 03 58
Right55 XX 00 04 59
OK / Enter55 XX 00 00 55
Menu55 XX 14 00 69
Exit55 XX 16 00 6B
Return / Back55 XX 0A 00 5F
Source & Input Switching
Source (cycle / open list)55 XX 80 00 D5
Switch to HDMI 255 XX 80 11 E6
Switch to HDMI 355 XX 80 09 DE
Switch to HDMI 455 XX 80 08 DD
Switch to Front HDMI55 XX 80 0A DF
Switch to DisplayPort (DP)55 XX 80 15 EA
Switch to OPS55 XX 80 0B E0
Switch to Type-C 155 XX 80 16 EB
Switch to Type-C 255 XX 80 17 EC
Switch to USB55 XX 80 0F E4
Audio
Mute55 XX 1A 00 6F
Volume Up55 XX 0C 00 61
Volume Down55 XX 0E 00 63
Set Volume (0–100)55 XX 0F 00 64level 0 (min)55 XX 0F 64 C8level 100 (max)
Channel
Channel Up55 XX 10 00 65
Channel Down55 XX 12 00 67
Picture & Image
Picture Mode — Standard55 XX 28 00 7D
Picture Mode — Soft55 XX 28 01 7E
Picture Mode — Bright55 XX 28 02 7F
Set Contrast (0–100)55 XX 2A 00 7Fcontrast 055 XX 2A 64 E3contrast 100
Set Brightness (0–100)55 XX 2C 00 81brightness 055 XX 2C 64 E5brightness 100
Set Saturation (0–100)55 XX 2E 00 83saturation 055 XX 2E 64 E7saturation 100
Set Hue (0–100)55 XX 30 00 85hue 055 XX 30 64 E9hue 100
System & Apps
Home55 XX 91 00 E6
Whiteboard55 XX 93 00 E8
File Manager55 XX 98 00 ED
Settings App55 XX 99 00 EE
Screenshot55 XX 8A 00 DF
Sleep Timer
Sleep — 15 minutes55 XX 20 00 75
Sleep — 30 minutes55 XX 20 01 76
Sleep — 45 minutes55 XX 20 02 77
Sleep — Off55 XX 20 03 78
Service
Enter Factory Menu (service use only)55 XX 82 00 D7
Tip: hover any hex code and click to copy it to your clipboard.
Ref: #30230
    • Related Articles

    • InFocus INFxx00 Series - Documents

      Click on the corresponding file at the bottom of this page to download it. 00-Series Family Datasheet: InFocus_INFxx00_Series_Family_Datasheet.pdf Engineering drawings: 65": InFocus_INF6500_Engineering_Drawings.pdf ...
    • InFocus JTouch 50 Series (INFxx50) - Product Information

      Hardware Teaser video Jtouch_50_Series_HW_Intro.mp4 Product Specifications Presentation JTouch_50_Series_Brochure.pdf JTouch_50_Series_Specifications.pdf INF6550_Product_Specifications.pdf INF7550_Product_Specifications.pdf ...
    • INF 40 Series - RS232 Commands

      InFocus JTouch 4.0 RS232 Commands INF6540e, INF7540e, INF8640e Result Set success reply:34 30 31 2B 0D Set  fail         reply:34 30 31 2D 0D RS232 Settings  Baud Rate: 9600bps  Data bit: 8bits  Parity: None  Stop bit: 1 Lan RS232 Settings   IP: Ip ...
    • INF 50 Series - User Manual

      Web PDF – See attachment below
    • InFocus 40 Series - Product Specifications

      See attachments.