xxBDL4050D, xxBDL4051T, 65BDL3051T (Dragon 1.0) Scheduling Setup
Ensure
Home -> Advanced option -> Power save = Mode 4
Set the Date & Time
Home->Advanced option->Date and time
Set Auto sync temporarily to No (so you can change the date and time.)
Set Year, Month, Day, Hour, Minute and Daylight Saving time accordingly
When finish, Set Auto sync back to Yes, (so the date and time setting is saved.)
Set Schedule (example given for setting Schedule 1 to play website in Playlist 1)
Home->Schedule
Tick Number 1 (VERY IMPORTANT)
On = Set On time, Off = Set Off time (off time must be larger than on time in 24hr time format)
Input = HDMI, DVI, Browser, Custom (for custom app)
Tick: Mon, Tue, Wed,
Thu, Fri, Sat, Sun, Everyweek
Playlist 1 (Note: playlist 0 doesn’t exist)
Set other schedules accordingly
Related Articles
BDL4550D - Scheduling Setup
Configure Time Zone, Schedule Time Zone Check the installation/ship to address and work out the timezone Home->Advanced option->Date and Time Select the appropriate time zone and hit OK to save it Schedule Go back to Home->Advanced Option->Schedule ...xxBDL505xP (Dragon 1.5) scheduling setup
Ensure Home -> Advanced option -> Power save = Mode 4 Set the Date & Time Home->Advanced option->Date and time Set Auto sync temporarily to No (so you can change the date and time.) Set Year, Month, Day, Hour, Minute and Daylight Saving time ...Dragon 1.0 - Setup Guide - Video Wall
Note: This guide shows you the steps required to set-up a video wall Video wall daisy chaining (passing video signal from one screen to another) must only be done through DVI loop through and/or Display Port loop through. Using the 1st screen's HDMI ...Philips BDL Remote Control Not Working
Philips Signage Remote control not working: [1] Are you using the correct remote control (RC)? Part number: 398GRABDDNEPHT, see picture below: See important note at the end of this document [2] The green led must blink when you press the OK button on ...Phoenix 1.0 - Scheduling Setup
Ensure Home -> General settings -> Eco mode = Normal Home -> General settings -> Advanced power management = Off Set the Date & Time Home -> General Settings -> Clock Set the current time accordingly Set Schedule Home -> General Settings -> ...